How to Service the Throttle Position Sensor on 2004 Ford E-250?

In order to service the Throttle Position (TP) Sensor, begin the process by unconnecting the battery ground cable. The next step is to take out the air cleaner outlet tube and pull out the electrical connector of TP sensor. Now, unscrew the screws of the sensor and pull them off. Installation This can be installed by reversing the steps.

OEM 2004 Ford E-250 Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2004 Ford E-250 Throttle Position Sensor Part Number: F4SZ-9B989-AA
$50.61 MSRP: $83.27
You Save: $32.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Potentiometer - Engine Throttle; Throttle Pos Sensor; Fuel Injector; Throttle Sensor; Potentiometer; Injector
- Replaces: F4SZ-9B989-A
- Base No.: 9B989
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4SZ-9B989-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2004 Ford E-250 Throttle Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford E-250 Throttle Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford E-250 Throttle Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford E-250 Throttle Position Sensor Parts Q&A

Q: How to Service the Throttle Position Sensor on 2004 Ford E-250?
A: In order to service the Throttle Position (TP) Sensor, begin the process by unconnecting the battery ground cable. The next step is to take out the air cleaner outlet tube and pull out the electrical connector of TP sensor. Now, unscrew the screws of the sensor and pull them off. Installation This can be installed by reversing the steps.