How Should the Fog Light Bulb Be Handled and Replaced to Ensure Safety and Performance on 2004 Ford Escape?

The halogen fog lamp bulb requires special care because pressure gas inside creates a risk of bulb shattering when the envelope either receives a scratch or experiences a drop to the ground. Thus proper handling maintains safety by touching the bulb only at its base while preventing contact with glass. You should wait until right before you install the new bulb because keeping the fog lamp bulb out for too long can reduce its performance by letting contaminants settle on the lens and reflector. The fog lamps must stay off when the bulb is not installed. Replacement of the bulb starts with removing the tire and wheel before loosening the inner fender well by unscrewing bolts and removing pin-type retainers and screws. Position the inner fender well aside then disconnect the electrical connector from the lamp socket to extract the lamp assembly which will allow access to the bulb connector. Rephrase the installation process by performing the reversal steps of bulb replacement.

OEM 2004 Ford Escape Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fog Light Bulbs found

View related parts
2004 Ford Escape Headlamp Bulb, Front Part Number: YS4Z-13N021-AA
$13.85 MSRP: $20.17
You Save: $6.32 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Bulb & Retainer; Exterior Bulbs
- Position: Front
- Replaces: F4BZ-13N021-A, YS4Z-13466-AA
- Base No.: 13N021
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-13N021-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Tail Lamp Bulb, Rear Part Number: F4CZ-13466-A
$2.98 MSRP: $4.23
You Save: $1.25 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Turn Signal Light Bulb, Front; Rear; Brake; Tail; Back Up; Parking; Headlight; Car Bulbs; Backup Lamp Bulb; Signal, Parking, Marker, Stop Lamp Bulbs; Exterior Bulbs.
- Position: Rear
- Replaces: E5MY-13466-A
- Base No.: 13466
- Item Weight: 1.20 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4CZ-13466-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Dome Lamp, Front Part Number: F58Z-13466-A
$4.59 MSRP: $6.51
You Save: $1.92 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Dome Light, Front; Map Light, Front; Courtesy Light; Trunk Light; Interior Car Bulbs.; Dome Lamp Bulb; Cargo Lamp Bulb; Map Lamp Bulb
- Position: Front
- Replaces: F4DZ-13466-A
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F58Z-13466-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Backup Lamp Bulb, Amber/Clear, Rear Outer Part Number: E5RY-13466-B
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
- Position: Rear Outer
- Replaces: E9JY-13466-A, F4ZZ-13466-A
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E5RY-13466-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Active, Base, Hybrid, Limited, Limited Hybrid, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 3 Cyl 1.5 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Fog Lamp Bulb Part Number: YL8Z-13466-BB
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Bulb And Socket Assembly; Fog Light Bulb; Fog Light Bulbs; Car Bulbs
- Base No.: 13466
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-13466-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Tail Lamp Bulb, Front Part Number: YR3Z-13466-AD
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
ADD TO CART
Product Specifications
- Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Rear; Side Marker; Headlight; Back Up; Brake; Tail Light Bulbs; Backup Lamp Bulb; Signal Lamp Bulb; Parking Lamp Bulb; Stop Lamp Bulb; Exterior Bulbs
- Position: Front
- Replaces: F5AZ-13466-A
- Base No.: 13466
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YR3Z-13466-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Escape Tail Lamp Bulb, Lower Outer Part Number: F5DZ-13466-B
$2.03 MSRP: $2.88
You Save: $0.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
- Position: Lower Outer
- Replaces: F8DZ-13466-AB, E8AZ-13466-A
- Base No.: 13466
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5DZ-13466-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2004 Ford Escape Fog Light Bulb

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Escape Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Escape Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Escape Fog Light Bulb Parts Q&A

Q: How Should the Fog Light Bulb Be Handled and Replaced to Ensure Safety and Performance on 2004 Ford Escape?
A: The halogen fog lamp bulb requires special care because pressure gas inside creates a risk of bulb shattering when the envelope either receives a scratch or experiences a drop to the ground. Thus proper handling maintains safety by touching the bulb only at its base while preventing contact with glass. You should wait until right before you install the new bulb because keeping the fog lamp bulb out for too long can reduce its performance by letting contaminants settle on the lens and reflector. The fog lamps must stay off when the bulb is not installed. Replacement of the bulb starts with removing the tire and wheel before loosening the inner fender well by unscrewing bolts and removing pin-type retainers and screws. Position the inner fender well aside then disconnect the electrical connector from the lamp socket to extract the lamp assembly which will allow access to the bulb connector. Rephrase the installation process by performing the reversal steps of bulb replacement.