How to Service and Repair the Rack and Pinion Boot on 2004 Ford Escape?

Begin the service and repair of the rack and pinion boot by placing the boot cover to the side. Replacement of the rack and pinion boot requires a new nut because the original nut cannot be reused. The first step requires separation of the steering column shaft from the flexible coupling, then remove and discard the existing nut. After you have disconnected the steering column from the flexible coupling two times, work on removing the rack and pinion boot by unscrewing its nuts. The installation protocol for the new boot requires following steps in the opposite direction of removal.

OEM 2004 Ford Escape Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2004 Ford Escape Tie Rod Boot
Part Number: 7L8Z-3K661-A
Product Specifications
- Other Name: Boot; Rack and Pinion Bellows; Power Steering Cylinder Boot Kit; Rack and Pinion Boot
- Replaces: 1S7Z-3K661-AA
- Base No.: 3K661
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L8Z-3K661-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2004 Ford Escape Rack and Pinion Boot

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Escape Rack and Pinion Boot available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Escape Rack and Pinion Boot as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Escape Rack and Pinion Boot Parts Questions & Experts Answers

Q: How to Service and Repair the Rack and Pinion Boot on 2004 Ford Escape?
A: Begin the service and repair of the rack and pinion boot by placing the boot cover to the side. Replacement of the rack and pinion boot requires a new nut because the original nut cannot be reused. The first step requires separation of the steering column shaft from the flexible coupling, then remove and discard the existing nut. After you have disconnected the steering column from the flexible coupling two times, work on removing the rack and pinion boot by unscrewing its nuts. The installation protocol for the new boot requires following steps in the opposite direction of removal.