How to Service the Rack and Pinion Boot on 2005 Ford Escape?

To service the rack and pinion boot, place the vehicle in neutral in a hoist. Unscrew the outer tie-rod end and jam nut (Install it with a tightening 47 Nm). Next, remove the two boot clamps, and the boot itself, and repeat the procedure to install it again.

OEM 2005 Ford Escape Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2005 Ford Escape Tie Rod Boot Part Number: 7L8Z-3K661-A
Product Specifications
- Other Name: Boot; Rack and Pinion Bellows; Power Steering Cylinder Boot Kit; Rack and Pinion Boot
- Replaces: 1S7Z-3K661-AA
- Base No.: 3K661
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L8Z-3K661-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2005 Ford Escape Rack and Pinion Boot

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Rack and Pinion Boot available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Rack and Pinion Boot as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Rack and Pinion Boot Parts Q&A

Q: How to Service the Rack and Pinion Boot on 2005 Ford Escape?
A: To service the rack and pinion boot, place the vehicle in neutral in a hoist. Unscrew the outer tie-rod end and jam nut (Install it with a tightening 47 Nm). Next, remove the two boot clamps, and the boot itself, and repeat the procedure to install it again.