OEM 2004 Ford Excursion Transmitter

2004 Ford Excursion Transmitter Parts Questions & Experts Answers

• Q: How to program or reprogram the remote transmitters and wireless keyless entry keypad for F-Super Duty built before 12/03 on 2004 Ford Excursion?

  A: The programming operations for remote transmitters and wireless keyless entry keypads for F-Super Duty vehicles produced before 12/03 must be performed simultaneously. Start by using the electronic controls to open the vehicle through remote transmitters and keyless entry keypad (if present) or wireless keyless entry keypad (if installed) or door lock control switch when the driver door remains open. The correct procedure involves moving the key from OFF to RUN position eight times during 10 seconds and allowing RUN position at the eighth move. This protocol triggers program mode entry when all doors actuate lock and unlock sequences. The system can be confirmed in the programming sequence by buttoning any remote controller or keying into the wireless keypad entry which simultaneously engages door locking and unlocking functions. Program the entry for each remote transmitter along with wireless keyless entry keypad. Continue trying to lock and unlock the door after waiting several seconds in case of a response issue. Inspection and verification becomes necessary when door locks cannot be reached despite multiple trials to confirm the maximum number of both remote transmitters and wireless keyless entry keypads has not been surpassed. The programming mode exit becomes available after turning the key to OFF position or 20 second delay since entering programming or reaching the programmed device limit.