OEM Ford Excursion Transmitter

Ford Excursion Transmitter Parts and Q&A

• Transmitter
  F87Z-15K601-AA
  Q: How to program or reprogram keyless entry remote transmitters into the security module on Ford Excursion?

  A:

  All keyless entry remote transmitters need programming or reprogramming together when added to the vehicle security module. Start programming only after verifying the vehicle is open. The module needs to remove the TIC along with rolling codes from all current keyfobs before enabling up to four new keys to be programmed. Start by cycling the ignition from OFF to RUN a total of eight times during ten seconds while ending in RUN position because successful program entry will create an all-door lock-followed-by-unlock sequence. You must press any button on the keyless entry remote transmitter to check if programming was successful based on door lock and unlock events. When door lockels fail to respond users should wait several seconds before pressing the keyfob button again. The TIC programming mode exits through either switching the ignition to OFF position or waiting 20 seconds past programming events or transmitting four TICs to the receiver. A successful TIC programming will result in the vehicle locking and unlocking sequence as a confirmation.