My Garage
Cart

OEM 2004 Ford Excursion Turn Signal Switch

Turn Signal Indicator Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

  • 2004 Ford Excursion Turn Signal Switch Diagram - 4C7Z-13K359-AAA
    View related parts
    Product Specifications
    • Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Multi Purpose Switch; Combination Switch
    • Replaces: 2C7Z-13K359-AAA
    • Base No.: 13K359
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 10.2 x 4.5 x 6.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4C7Z-13K359-AAA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Ford Excursion Submodels:
    • Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2004 Ford Excursion Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Excursion Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Excursion Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Excursion Turn Signal Switch Parts Q&A

  • Q: How to service and repair the turn signal switch on 2004 Ford Excursion?
    A: You should start repairing the turn signal switch by putting the ignition key into the lock cylinder port then setting it to RUN. The ignition switch lock cylinder needs to be removed through a punch-operated tab release followed by pulling out the lock cylinder. Turn the tilt wheel handle and shank when they can be removed from the assembly. The first step requires you to remove upper and lower shrouds from the steering column through screw removal. The installation starts with unscrewing the multifunction switch along with connector detachment until complete removal of the switch takes place. The installation process ends with the opposite maneuvers used for removing all components.