How to service the front fender on 2004 Ford Expedition?

You must commence front fender service on the Expedition by removing the front fender splash shield and front fender to front bumper cover bolts. The service starts with removing the bolt keeping the front fender connected to the radiator support followed by removing the lower bolts linking the front fender to its place. Start by removing the front fender foam insulator as well as the pin-type retainer followed by the removal of the inner bolts from the front fender. You should first unfasten the bolt holding the headlamp in place followed by removing the headlamp by disconnecting its bolts while also unscrewing the electrical connectors. Last but not least take out the front fender by eradicating its final mounting bolts after eliminating the front fender front bolts and the cowl panel grille. The installation of a new fender requires performing the steps that were used for its removal in reverse order.

OEM 2004 Ford Expedition Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fenders found

View related parts
2004 Ford Expedition Fender, Front Driver Side Part Number: 2L1Z-16006-CA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Position: Front Driver Side
- Base No.: 16005B
- Item Weight: 14.90 Pounds
- Item Dimensions: 59.9 x 40.2 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-16006-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Fender, Front Driver Side Part Number: 2L1Z-16006-DA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Front Driver Side
- Base No.: 16005B
- Item Weight: 24.20 Pounds
- Item Dimensions: 57.7 x 40.7 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-16006-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Fender, Front Passenger Side Part Number: 2L1Z-16005-DA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Base No.: 16005A
- Item Weight: 23.60 Pounds
- Item Dimensions: 56.1 x 40.7 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-16005-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Fender, Front Passenger Side Part Number: 2L1Z-16005-CA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Base No.: 16005A
- Item Weight: 22.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-16005-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2004 Ford Expedition Fender

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Expedition Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Expedition Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Expedition Fender Parts Q&A

Q: How to service the front fender on 2004 Ford Expedition?
A: You must commence front fender service on the Expedition by removing the front fender splash shield and front fender to front bumper cover bolts. The service starts with removing the bolt keeping the front fender connected to the radiator support followed by removing the lower bolts linking the front fender to its place. Start by removing the front fender foam insulator as well as the pin-type retainer followed by the removal of the inner bolts from the front fender. You should first unfasten the bolt holding the headlamp in place followed by removing the headlamp by disconnecting its bolts while also unscrewing the electrical connectors. Last but not least take out the front fender by eradicating its final mounting bolts after eliminating the front fender front bolts and the cowl panel grille. The installation of a new fender requires performing the steps that were used for its removal in reverse order.