How to Service and Repair the Motor And Transmission Mount on a 4R100 Automatic Transmission on 2004 Ford Expedition?

The first step for fixing a 4R100 automatic transmission mount requires hoisting the vehicle into neutral position before starting the work. Discard the dampener by extracting its bolts and eliminate the rear transmission support nuts. Start by mounting the transmission with the suitable transmission jack then unfasten the LH and RH heat shield mounting bolts. Begin by taking out the crossmember bolts then breaking the crossmember loose before breaking loose and removing the rear transmission mount bolts. Start by setting the rear transmission mount into position and fasten it with its bolts during installation. Begin by reinstalling the crossmember and its bolts and then move on to securing the right and left heat shield bolts. You must remove the high-lift transmission jack and install both rear transmission support nuts before you can reinstall the dampener along with its bolts then position the vehicle into its lowered state.

OEM 2004 Ford Expedition Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Motor And Transmission Mounts found

View related parts
2004 Ford Expedition Transmission Mount Part Number: 5C3Z-6068-BB
$83.01 MSRP: $120.83
You Save: $37.82 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Base No.: 6068
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.0 x 4.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-6068-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Motor Mount, Driver Side Part Number: 5L7Z-6038-CA
$93.55 MSRP: $136.17
You Save: $42.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: 2L1Z-6038-DA
- Base No.: 6038B
- Item Weight: 7.90 Pounds
- Item Dimensions: 9.6 x 6.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L7Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Motor Mount, Passenger Side Part Number: 4L1Z-6038-DA
$158.79 MSRP: $219.68
You Save: $60.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038A
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.2 x 7.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L1Z-6038-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Motor Mount, Driver Side Part Number: 2L1Z-6038-EB
$485.78 MSRP: $713.33
You Save: $227.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Base No.: 6038B
- Item Weight: 7.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-6038-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
2004 Ford Expedition Transmission Mount Part Number: 5L1Z-6068-EA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 2L1Z-6068-EB
- Base No.: 6068
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L1Z-6068-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Motor Mount, Passenger Side Part Number: 2L1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038A
- Item Weight: 6.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
2004 Ford Expedition Trans Crossmember, Rear Part Number: 2L1Z-6A023-DA
Product Specifications
- Other Name: Support; Transmission Crossmember, Rear; Transfer Case Mount; Transmission Mount
- Position: Rear
- Base No.: 6A023
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-6A023-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Trans Crossmember, Rear Part Number: 2L1Z-6A023-CA
Product Specifications
- Other Name: Support; Transmission Crossmember, Rear; Transfer Case Mount; Transmission Mount
- Position: Rear
- Base No.: 6A023
- Item Weight: 16.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-6A023-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Rear Mount Part Number: 2L1Z-6068-EA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Bracket; Motor Mount; Insulator Assembly - Engine Support
- Base No.: 6068
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-6068-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Motor Mount, Passenger Side Part Number: 4L1Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket
- Position: Passenger Side
- Base No.: 6038A
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L1Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS

2004 Ford Expedition Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Expedition Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Expedition Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Expedition Motor And Transmission Mount Parts Q&A

Q: How to Service and Repair the Motor And Transmission Mount on a 4R100 Automatic Transmission on 2004 Ford Expedition?
A: The first step for fixing a 4R100 automatic transmission mount requires hoisting the vehicle into neutral position before starting the work. Discard the dampener by extracting its bolts and eliminate the rear transmission support nuts. Start by mounting the transmission with the suitable transmission jack then unfasten the LH and RH heat shield mounting bolts. Begin by taking out the crossmember bolts then breaking the crossmember loose before breaking loose and removing the rear transmission mount bolts. Start by setting the rear transmission mount into position and fasten it with its bolts during installation. Begin by reinstalling the crossmember and its bolts and then move on to securing the right and left heat shield bolts. You must remove the high-lift transmission jack and install both rear transmission support nuts before you can reinstall the dampener along with its bolts then position the vehicle into its lowered state.