How to Service and Repair the Motor and Transmission Mount on Ford Expedition?

The transmission mount service and repair process starts with disconnecting the battery ground cable and hoisting the vehicle before proceeding. Proper reinstallation of the driveshaft requires marking the yoke on the rear driveshaft as well as the axle flange for balance retention. First remove the driveshaft through step-by-step removal of its four bolts and then remove the drive shaft unit. Begin by using a High-Lift Jack to support the transmission before uninstalling transmission crossmember securing hardware and pulling out the crossmember. Proceed to eliminate the support insulator that connects to the rear section. Place the rear support insulator first before aligning the transmission crossmember and fixing the bolts for installation. Follow up by detaching the High-Lift Jack and install the nuts onto the transmission crossmember bolts. Place back the driveshaft followed by lowering the vehicle then reattach the battery ground cable.

OEM Ford Expedition Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

52 Motor And Transmission Mounts found

View related parts
Ford Expedition Transmission Mount Part Number: 5C3Z-6068-BB
$83.01 MSRP: $120.83
You Save: $37.82 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: FL3Z-6068-E
$79.89 MSRP: $116.28
You Save: $36.39 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Manual Transmission Mount; Hanger; Mount
- Replaces: BL3Z-6068-B, BL3Z-6068-E, FL3Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: GL3Z-6068-D
$123.68 MSRP: $180.03
You Save: $56.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Catalytic Converter Bracket; Exhaust Bracket; Mount Bracket; Hanger; Mount
- Replaces: BL3Z-6068-A, FL3Z-6068-A, GL3Z-6068-A, GL3Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Driver Side Part Number: 2L1Z-6038-EB
$485.78 MSRP: $713.33
You Save: $227.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: JL1Z-6068-F
$132.25 MSRP: $192.50
You Save: $60.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Transfer Case Mount
- Replaced by: JL1Z-6068-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Expedition | Limited, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Mount Bracket, Passenger Side Part Number: ML3Z-6030-F
$98.12 MSRP: $142.82
You Save: $44.70 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: JL1Z-6068-G
$122.55 MSRP: $178.38
You Save: $55.83 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount
- Replaced by: JL1Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Driver Side Part Number: JL1Z-6038-A
$144.84 MSRP: $210.83
You Save: $65.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Side Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Passenger Side Part Number: NL1Z-6038-B
$115.62 MSRP: $168.30
You Save: $52.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Side Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: FL1Z-6068-B
$118.90 MSRP: $173.07
You Save: $54.17 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Exhaust Bracket; Mount Bracket; Transmission Mount Bolt
- Replaces: FL1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: JL1Z-6068-J
$132.25 MSRP: $192.50
You Save: $60.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount
- Replaces: JL1Z-6068-C, JL1Z-6068-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Driver Side Part Number: NL1Z-6038-C
$120.79 MSRP: $175.82
You Save: $55.03 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Side Mount
- Position: Driver Side
- Replaces: NL1Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Side Mount Part Number: JL1Z-6038-B
$101.01 MSRP: $147.03
You Save: $46.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: GL3Z-6068-E
$81.40 MSRP: $118.48
You Save: $37.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Exhaust System Hanger; Auto & Manual Transmission Mounts; Hanger; Mount
- Replaces: BL3Z-6068-G, FL3Z-6068-C, GL3Z-6068-B, 9L3Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: JL1Z-6068-E
$114.74 MSRP: $167.02
You Save: $52.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Transfer Case Mount
- Replaces: JL1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Expedition | Limited, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Driver Side Part Number: JL3Z-6038-B
$147.36 MSRP: $214.50
You Save: $67.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Mount
- Manufacturer Note: INSULATOR
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Motor Mount, Passenger Side Part Number: 2L1Z-6038-DB
$156.43 MSRP: $216.41
You Save: $59.98 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Trans Crossmember Part Number: F65Z-6A023-CF
Product Specifications
- Other Name: Support; Transmission Crossmember
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Transmission Mount Part Number: F85Z-6068-EA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Motor Mount, Passenger Side Part Number: 2L1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS

| Page 1 of 3 |Next >

1-20 of 52 Results

Ford Expedition Motor And Transmission Mount

OEM Motor And Transmission Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Motor And Transmission Mount with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

In F ord Expedition cars, the Motor And Transmission Mount plays a very essential function because it firmly fastens the transmission while at the same time, preserving it against the impacts of the engine movement. This component play a great role in keeping the vehicle at a steady output while at the same time ensuring that the drivetrain in the vehicle is in optimum condition. In some of the cases depending on the specification of the transmission, the ford expedition models may use one or more of the mentioned Motor And Transmission Mounts to provide this support. For quite some time now, different types of Motor And Transmission Mounts have been used on different models of Ford Expedition and this has been due to changes in structural designs and engineering. These mounts may also vary in construction from one model to other and in the types of material used in their manufacture, thus affecting vibration isolation and the product's stiffness. Progressing of the Motor And Transmission Mount in Ford Expedition models demonstrates technological changes in automobiles which are used to improve the performance, comfort and reliability of automobiles.

Ford Expedition Motor And Transmission Mount Parts and Q&A

Transmission Mount
F85Z-6068-EA
Q: How to Service and Repair the Motor and Transmission Mount on Ford Expedition?
A:
The transmission mount service and repair process starts with disconnecting the battery ground cable and hoisting the vehicle before proceeding. Proper reinstallation of the driveshaft requires marking the yoke on the rear driveshaft as well as the axle flange for balance retention. First remove the driveshaft through step-by-step removal of its four bolts and then remove the Drive Shaft unit. Begin by using a High-Lift Jack to support the transmission before uninstalling transmission crossmember securing hardware and pulling out the crossmember. Proceed to eliminate the support insulator that connects to the rear section. Place the rear support insulator first before aligning the transmission crossmember and fixing the bolts for installation. Follow up by detaching the High-Lift Jack and install the nuts onto the transmission crossmember bolts. Place back the driveshaft followed by lowering the vehicle then reattach the battery ground cable.