How to service the shock absorber on the wagon on 2004 Ford Focus?

Start shock absorber servicing procedures by removing the wheel and tire from the rear section of the wagon. You must detach the exhaust system from the rear hanger insulator before you can remove the exhaust heat shield on the left-hand shock absorber. After placing a transmission jack beneath the lower arm remove both the upper retaining bolt as well as the shock absorber itself. The procedure to tighten the lower retaining bolt should be completed when the vehicle stands on its road wheels. Lower and unscrew the transmission jack as you finish installing both the shock absorber and its upper bolt. Place the left-hand shock absorber then return the exhaust heat shield and reassemble the exhaust system to the rear hanger insulator. You should install the rear wheel with tire while tightening the lower retaining bolt.

OEM 2004 Ford Focus Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shock Absorbers found

View related parts
2004 Ford Focus Strut, Front Passenger Side Part Number: 3U2Z-18124-TA
$58.43 MSRP: $79.52
You Save: $21.09 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Right Suspension Strut Kit; Complete Strut and Shock Absorber Set.
- Position: Front Passenger Side
- Replaces: 3S4Z-18124-AB
- Base No.: 18124
- Item Weight: 9.60 Pounds
- Item Dimensions: 8.0 x 7.4 x 28.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-18124-TA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Shock Absorber, Rear Part Number: 6S4Z-18125-F
$42.91 MSRP: $58.40
You Save: $15.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 3S4Z-18125-CA, 6S4Z-18125-CA
- Base No.: 18125
- Item Weight: 3.60 Pounds
- Item Dimensions: 19.9 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6S4Z-18125-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Shock Absorber, Rear Part Number: 9S4Z-18125-A
$54.26 MSRP: $89.27
You Save: $35.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock Absorber Kit; Strut and Shock Assembly.; Shock Assembly; Shock; Suspension Shock Absorber
- Manufacturer Note: Without Attaching Hardware
- Position: Rear
- Replaces: 2M5Z-18125-BA, 7S4Z-18125-B, 8S4Z-18125-A, AST-156, AST-293, 6S4Z-18125-BA, AST-39, AST-353
- Base No.: 18125
- Item Weight: 4.20 Pounds
- Item Dimensions: 27.0 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-18125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, S, SE, SEL, SES, ST, SVT, ZTS, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Shock Absorber, Rear Part Number: 7S4Z-18125-DB
$48.08 MSRP: $78.55
You Save: $30.47 (39%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 6S4Z-18125-E
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 27.0 x 2.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7S4Z-18125-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Strut, Front Driver Side Part Number: 3S4Z-18124-AA
$68.88 MSRP: $93.74
You Save: $24.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Left Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Manufacturer Note: LH, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Driver Side
- Replaces: 3U2Z-18124-BT, 2M5Z-18124-AE, AST-133, 2M5Z-18124-AC, 3S4Z-18124-BA, AST-53
- Base No.: 18124
- Item Weight: 9.40 Pounds
- Item Dimensions: 7.7 x 7.4 x 24.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Strut, Front Passenger Side Part Number: 3S4Z-18124-BB
Product Specifications
- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Complete Strut Assembly.; Shock Absorber
- Position: Front Passenger Side
- Replaces: 2M5Z-18124-BD
- Base No.: 18124
- Item Weight: 8.80 Pounds
- Item Dimensions: 22.7 x 6.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2004 Ford Focus Strut, Front Passenger Side Part Number: 3U2Z-18124-CH
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut, Front Right
- Position: Front Passenger Side
- Base No.: 18124
- Item Weight: 9.80 Pounds
- Item Dimensions: 6.1 x 6.4 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-18124-CH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- SVT | 4 Cyl 2.0 L GAS
View related parts
2004 Ford Focus Strut, Front Driver Side Part Number: 2M5Z-18124-BB
Product Specifications
- Other Name: Shock Absorber Assembly; Front Left Suspension Strut Kit; Shock Absorber Set; Strut Shock Kit; Shock Absorber Assembly - Front; Shock Absorber
- Manufacturer Note: LH, SVT
- Position: Front Driver Side
- Base No.: 18124
- Item Weight: 8.80 Pounds
- Item Dimensions: 6.1 x 6.1 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-18124-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Focus Submodels:
- SVT | 4 Cyl 2.0 L GAS

2004 Ford Focus Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Focus Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Focus Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Focus Shock Absorber Parts Q&A

Q: How to service the shock absorber on the wagon on 2004 Ford Focus?
A: Start shock absorber servicing procedures by removing the wheel and tire from the rear section of the wagon. You must detach the exhaust system from the rear hanger insulator before you can remove the exhaust heat shield on the left-hand shock absorber. After placing a transmission jack beneath the lower arm remove both the upper retaining bolt as well as the shock absorber itself. The procedure to tighten the lower retaining bolt should be completed when the vehicle stands on its road wheels. Lower and unscrew the transmission jack as you finish installing both the shock absorber and its upper bolt. Place the left-hand shock absorber then return the exhaust heat shield and reassemble the exhaust system to the rear hanger insulator. You should install the rear wheel with tire while tightening the lower retaining bolt.