FordParts
My Garage
My Account
Cart
OEM 2004 Ford Freestar Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shock Absorbers found
2004 Ford Freestar Shock Absorber, Rear Part Number: 2F2Z-18125-B
$40.24 MSRP: $54.76You Save: $14.52 (27%)Product Specifications- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 6F2Z-18125-A, ASH-24577, 2F2Z-18125-A, 3F2Z-18125-AA, 2F2Z-18125-AB, ASH-239, ASH-1121, ASH-52, 6F2Z-18125-AB
- Base No.: 18125
- Item Weight: 4.80 Pounds
- Item Dimensions: 20.9 x 3.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F2Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Freestar Strut, Front Part Number: 3F2Z-18124-AA
Product Specifications- Other Name: Shock Absorber Assembly; Front Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Manufacturer Note: Includes Attaching Hardware
- Position: Front
- Replaces: 6F2Z-18124-AD, AST-233
- Base No.: 18124
- Item Weight: 11.50 Pounds
- Item Dimensions: 29.3 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3F2Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Freestar Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Freestar Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Freestar Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Freestar Shock Absorber Parts Q&A
- Q: How to service and repair the shock absorber and spring assembly on 2004 Ford Freestar?A: Service and repair of shock absorber and spring assembly begins by taking out the assembly from the vehicle. Place reference marks on the mount and on the shock absorber unit and the spring so you can align them correctly during reinstallation. A suitable spring compressor should push the spring until shock absorber tension is removed. Follow the specified order of component removal while separating the strut from the spring assembly top shaft retaining nut by inserting a suitable pass-through socket wrench onto the strut shaft top retaining nut and placing a 10-mm six-point deep well socket on top of the strut shaft. Secure the retaining nut into position before you take off the strut shaft. Before installing a new spring verify its specifications by comparing the VC label spring code to the correct information. The reassembly process should be performed by reversing disassembly steps.