How to Service and Repair the Rear Sway Bar Link on 2004 Lincoln LS?

A correctly positioned hex holding device must be applied to stop ball studs from rotating while removing the ball stud nuts. To service the sway bar link, measure the wheel hub center to fender lip distance while the vehicle is loaded on its wheel assemblies. Start by taking off both rear wheels and tires followed by performing the removal steps shown in the provided illustration as well as table. Refer to the given instructions for each part of removal and installation steps. The installation procedure involves reversing the removal steps. Before tightening the fasteners to the upper arm and frame, you should raise the lower arm with a jack until the center hub distance matches the measurements obtained before tightening. Use suitable jack stands to support the subframe while you lower its front section 37 mm (1.48 inches) using the provided illustration and table. When tightening sway bar link-to-sway bar nuts, it is essential to use new protective caps on links.

OEM 2004 Lincoln LS Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2004 Lincoln LS Stabilizer Link, Rear Driver Side
Part Number: XW4Z-5C487-AA
$64.68 MSRP: $80.00
You Save: $15.32 (20%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Left Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Driver Side
- Base No.: 5C486
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.4 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-5C487-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2004 Lincoln LS Stabilizer Link, Rear Passenger Side
Part Number: XW4Z-5C486-AA
$59.96 MSRP: $74.17
You Save: $14.21 (20%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Right Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Passenger Side
- Base No.: 5C486
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.3 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-5C486-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2004 Lincoln LS Stabilizer Link, Front
Part Number: 5W4Z-5K483-AA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Rod/Strut, Stabiliser; Sway Bar Link; Suspension Stabilizer Bar Link
- Position: Front
- Replaces: 1W4Z-5K484-AA
- Base No.: 5K483
- Item Weight: 1.20 Pounds
- Item Dimensions: 1.4 x 3.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2004 Lincoln LS Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln LS Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln LS Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Lincoln LS Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Rear Sway Bar Link on 2004 Lincoln LS?
A: A correctly positioned hex holding device must be applied to stop ball studs from rotating while removing the ball stud nuts. To service the sway bar link, measure the wheel hub center to fender lip distance while the vehicle is loaded on its wheel assemblies. Start by taking off both rear wheels and tires followed by performing the removal steps shown in the provided illustration as well as table. Refer to the given instructions for each part of removal and installation steps. The installation procedure involves reversing the removal steps. Before tightening the fasteners to the upper arm and frame, you should raise the lower arm with a jack until the center hub distance matches the measurements obtained before tightening. Use suitable jack stands to support the subframe while you lower its front section 37 mm (1.48 inches) using the provided illustration and table. When tightening sway bar link-to-sway bar nuts, it is essential to use new protective caps on links.