My Garage
Cart

OEM 2004 Lincoln Town Car Light Control Module

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Light Control Module found

  • 2004 Lincoln Town Car Light Control Module - 4W1Z-13C788-BA
    2004 Lincoln Town Car Light Control Module Diagram - 4W1Z-13C788-BA
    View related parts
    Product Specifications
    • Other Name: Processor - Lighting; Module - Lighting Control
    • Manufacturer Note: Service Kit
    • Replaces: 3W1Z-13C788-BA, 4W1Z-13C788-AA
    • Base No.: 13C788
    • Item Weight: 1.80 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4W1Z-13C788-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS

2004 Lincoln Town Car Light Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln Town Car Light Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln Town Car Light Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Lincoln Town Car Light Control Module Parts Q&A

  • Q: How to Service and Repair the Light Control Module on 2004 Lincoln Town Car?
    A: Before removing the Lighting Control Module (LCM) users must transfer its configuration data to a diagnostic tool because this data needs to be restored to the new module upon replacement. You should begin your work by disconnecting the battery ground cable. Start by removing the left-hand instrument panel lower insulator through a process of pin-type retainer removal to disconnect the courtesy lamp. Before continuing remove the accelerator pedal and its shaft to freely set the LCM in place. First remove the locking tab by breaking the screw then disconnect the electrical connectors to completely take out the LCM. When accomplishing installation follow the reverse order of removal steps while implementing diagnostic tool-based download of saved configuration data to the new module after its installation.