How to Service the A/C Hose from Condenser to Evaporator on 2004 Mercury Marauder?

Start service efforts on the condenser to evaporator line by recovering all refrigerant present. Separate the A/C fitting from its nut before you disconnect both parts at the fitting while dropping the O-ring seal into the trash. Next follow by cutting the spring lock coupling at the evaporator core inlet before discarding the used O-ring seals. The technician should next detach the condenser-to-evaporator line. Perform installation by following the opposite order of removal steps while using fresh O-ring seals that received PAG oil lubrication and apply correct amounts of clean PAG oil to the refrigerant system. Evacuate the refrigerant system after that perform a leak test then fully charge it. A new suction accumulator must be installed only when operational contamination from a faulty A/C compressor or damaged suction accumulator can be physically verified.

OEM 2004 Mercury Marauder A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Hoses found

View related parts
2004 Mercury Marauder A/C Hose
Part Number: 3W7Z-19835-BA
$48.51 MSRP: $66.01
You Save: $17.50 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; Liquid Line
- Manufacturer Note: Condenser to evaporator (#2 in illust.)
- Base No.: 19835
- Item Weight: 1.00 Pounds
- Item Dimensions: 27.8 x 2.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder A/C Hose
Part Number: 4W7Z-19835-AA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; Liquid Line
- Manufacturer Note: Evaporator to accumulator tank (#1 in illust.), FROM 9/08/04
- Replaces: 3W7Z-19835-CB
- Base No.: 19835
- Item Weight: 2.20 Pounds
- Item Dimensions: 1.6 x 3.1 x 28.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Hose & Tube Assembly
Part Number: JU2Z19D734E
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Manifold Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Manifold
- Replaces: 3W7Z-19D734-CA
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JU2Z19D734E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS

2004 Mercury Marauder A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Marauder A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Marauder A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Mercury Marauder A/C Hose Parts Questions & Experts Answers

Q: How to Service the A/C Hose from Condenser to Evaporator on 2004 Mercury Marauder?
A: Start service efforts on the condenser to evaporator line by recovering all refrigerant present. Separate the A/C fitting from its nut before you disconnect both parts at the fitting while dropping the O-ring seal into the trash. Next follow by cutting the spring lock coupling at the evaporator core inlet before discarding the used O-ring seals. The technician should next detach the condenser-to-evaporator line. Perform installation by following the opposite order of removal steps while using fresh O-ring seals that received PAG oil lubrication and apply correct amounts of clean PAG oil to the refrigerant system. Evacuate the refrigerant system after that perform a leak test then fully charge it. A new suction accumulator must be installed only when operational contamination from a faulty A/C compressor or damaged suction accumulator can be physically verified.