Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 4W7Z-19835-AA
A/C Hose

2003-2005 Ford 4W7Z19835AA

Customer Questions & Expert Answers (7)
Ford 4W7Z-19835-AA A/C Hose
  • Part Description
    Tube Assembly; A/C Refrigerant Liquid Hose
  • Base No.
    19835
  • Replaces
    3W7Z-19835-CB
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2003 Mercury Marauder A/C Hose Diagram for 4W7Z-19835-AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4W7Z-19835-AA

  • Product Specifications

    BrandGenuine Ford
    Base No.19835
    Manufacturer Part Number4W7Z-19835-AA
    Part DescriptionTube Assembly; A/C Refrigerant Liquid Hose
    Other NamesLiquid Line
    Manufacturer NoteEvaporator to accumulator tank (#1 in illust.), FROM 9/08/04
    Item Dimensions1.6 x 3.1 x 28.1 inches
    Item Weight2.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces3W7Z-19835-CB
    ManufacturerFord
    SKU4W7Z-19835-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor, S, Special Edition8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
    2003-2005 Mercury Grand MarquisGS, GSL, Limited Edition, LS, LSE, Ultimate Edition8 Cyl 4.6 L GAS
    2003-2004 Mercury MarauderBase8 Cyl 4.6 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is this 4W7Z-19835-AA compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 4W7Z-19835-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair the A/C Hose from the Compressor to the Condenser Discharge on Mercury Grand Marquis? Posted by Customer
    A:
    The first step for servicing the HVAC hose/line between compressor and condenser discharge consists of refrigerant recovery. You need to disconnect the A/C fitting through nut removal and disposing of the O-ring seal. First disconnect the spring lock coupling that connects to the evaporator core inlet while removing the O-ring seals as waste material. Remove the condenser-to-evaporator line. The installation steps involve performing the reverse procedure of removal while you must use fresh O-ring seals that received PAG oil lubrication. The refrigerant system requires cleaning oil of type PAG to apply the correct amount of lubrication. The refrigerant system must have its evacuation followed by leak testing before receiving its refrigerant charge.
    Posted by FordPartsDeal Specialist
    Q:
    When is it necessary to install a new suction accumulator for the 2005 Ford Crown Victoria? Posted by Customer
    A:
    Installation of a new suction accumulator is only necessary if there is physical evidence of contamination from a failed A/C compressor or damage to the suction accumulator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    When is the installation of a new suction accumulator necessary for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    It is only necessary if there is physical evidence of contamination from a failed A/C compressor or damage to the suction accumulator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step to service the suction accumulator to evaporator line for the 2004 Mercury Marauder? Posted by Customer
    A:
    Begin by recovering the refrigerant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after disconnecting the first spring lock coupling for the 2003 Mercury Marauder? Posted by Customer
    A:
    Repeat the disconnection process for the second spring lock coupling and discard the O-ring seals again before removing the suction accumulator-to-evaporator line.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after disconnecting the spring lock coupling for the 2004 Mercury Marauder? Posted by Customer
    A:
    Remove the condenser-to-evaporator line.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 4W7Z-19835-AA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 4W7Z-19835-AA A/C Hose. It is sometimes referred to as Ford A/C Hose. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 4W7Z19835AA A/C Hose. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery