OEM 2004 Mercury Monterey Seat Cushion

2004 Mercury Monterey Seat Cushion Parts Questions & Experts Answers

• Q: How to service and repair the third row rear seat cushion on 2004 Mercury Monterey?

  A: The process of repairing the third row rear seat cushion begins with removing the third row seat then opening it to its usual sitting position. Follow the disorder shown in both the illustration and table to take apart these components. The backrest-to-cushion nuts need unthreading before you detach the backrest from the cushion when you release the hook-and-loop fastener and remove the fabric flap followed by releasing the center J-clips. You should direct the central fabric section behind the tether anchor bar to take out the seat backrest. Remove the screws as well as pin-type retainers before removing the cushion trim cover. When removing the J-clips and hook-and-loop fasteners pay close attention to prevent harm to the hook-and-loop strip on the foam pad of the seat backrest. This removal process requires discarding all hog rings together with the removal of the cushion trim cover. To prepare the cushion latch cables users must loosen the cables before guiding the handle through the seat pan before removing its attachment from the seat pan clips. The reverse order applied to disassembly provides all the steps needed for reassembly.