How to Service and Repair the Motor and Transmission Mount on 2004 Mercury Sable?

Service and repair of the transmission mount starts by putting the vehicle into NEUTRAL mode then placing it on a hoist. You should start by eliminating the LH wheel and tire from the vehicle along with positioning a high-lift transmission jack underneath the transaxle. You should first remove the nut securing the engine and transaxle upper support insulator before proceeding to take out the bolts and bracket of the upper support. Following those steps it becomes necessary to remove both bolts and the insulator itself. The first step of the installation process requires placing the new engine and transaxle support insulator before securing it with bolts. Fasten the upper support bracket using its screws while fastening the insulator nut simultaneously. Finish this task by taking out the high-lift transmission jack and reinstalling both the left-hand wheel with tire on before lowering the vehicle into position.

OEM 2004 Mercury Sable Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Motor And Transmission Mounts found

View related parts
2004 Mercury Sable Rear Mount
Part Number: 4F1Z-6068-BA
$54.94 MSRP: $74.76
You Save: $19.82 (27%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Position: Rear
- Replaces: YF1Z-6068-AA
- Base No.: 6068
- Item Weight: 2.80 Pounds
- Item Dimensions: 6.1 x 3.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Sable Submodels:
- GS, LS | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2004 Mercury Sable Front Mount
Part Number: YF1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Base No.: 6038
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2004 Mercury Sable Rear Mount
Part Number: YF1Z-6068-AB
Product Specifications
- Other Name: Insulator; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Position: Rear
- Replaces: 4F1Z-6068-AA, F6DZ-6068-A
- Base No.: 6068
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.4 x 10.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6068-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Sable Submodels:
- G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS
View related parts
2004 Mercury Sable Transmission Mount, Rear
Part Number: 3F1Z-6F063-AA
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Rear Insulator
- Position: Rear
- Replaces: YF1Z-6F063-AA
- Base No.: 6F063
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2004 Mercury Sable Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Sable Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Sable Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Mercury Sable Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2004 Mercury Sable?
A: Service and repair of the transmission mount starts by putting the vehicle into NEUTRAL mode then placing it on a hoist. You should start by eliminating the LH wheel and tire from the vehicle along with positioning a high-lift transmission jack underneath the transaxle. You should first remove the nut securing the engine and transaxle upper support insulator before proceeding to take out the bolts and bracket of the upper support. Following those steps it becomes necessary to remove both bolts and the insulator itself. The first step of the installation process requires placing the new engine and transaxle support insulator before securing it with bolts. Fasten the upper support bracket using its screws while fastening the insulator nut simultaneously. Finish this task by taking out the high-lift transmission jack and reinstalling both the left-hand wheel with tire on before lowering the vehicle into position.