FordParts
My Garage
My Account
Cart
OEM 2005 Ford Crown Victoria Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Bumpers found
Product Specifications- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: F8AZ-17K835-AA
- Base No.: 17K835
- Item Weight: 22.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YW7Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Crown Victoria Impact Bar, Front Part Number: 3W7Z-17757-AA
Product Specifications- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Base No.: 17757
- Item Weight: 14.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Replaces: 1W7Z-17D957-CA
- Base No.: 17D957
- Item Weight: 13.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-17D957-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Rear
- Replaces: F8AZ-17906-AA
- Base No.: 17906
- Item Weight: 25.90 Pounds
- Item Dimensions: 6.6 x 57.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Crown Victoria Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Crown Victoria Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Crown Victoria Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Crown Victoria Bumper Parts Q&A
- Q: How to service the rear bumper cover on 2005 Ford Crown Victoria?A: Start bumper cover maintenance by putting the vehicle into the neutral gear and securely hoisting it. The first step starts by removing the screws that secure the rear bumper cover then proceeding to remove pin-type retainers and screws which are located on each side. The first step involves extracting 6 pin-type retainers so that 3 of these parts reside on each side. The vehicle needs to be lowered before removing both pin-type retainers and the luggage compartment rear trim panel. Start by keeping aside the luggage compartment lining material before removing the 4 rear bumper cover nuts which should be taken from each side. The rear bumper cover separation can be achieved by removing all six nuts which are distributed between left and right sides. The installation procedure for the new cover involves performing all steps backward from removal.