How to service and repair the Water Pump on 2005 Ford E-150?

Removing the fan, fan clutch, accessory drive belt, and pulley are required to take out the coolant pump and repair it. Removal of bolts between the pump and the block. Install a new O-ring that has been lubricated with coolant, tighten the pump, re-connect the pulley and re-fit the belt and fan.

OEM 2005 Ford E-150 Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

View related parts
2005 Ford E-150 Water Pump Part Number: 3L3Z-8501-CA
$51.84 MSRP: $83.64
You Save: $31.80 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2005 Ford E-150 Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-150 Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-150 Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford E-150 Water Pump Parts Q&A

Q: How to service and repair the Water Pump on 2005 Ford E-150?
A: Removing the fan, fan clutch, accessory drive belt, and pulley are required to take out the coolant pump and repair it. Removal of bolts between the pump and the block. Install a new O-ring that has been lubricated with coolant, tighten the pump, re-connect the pulley and re-fit the belt and fan.