How to service and repair the evaporative emission canister purge valve on 2005 Ford E-250?

Amend the first step when servicing or repairing the evaporative emission canister purge valve by uninstalling the battery ground cable to lower the chances of fuel vapor explosions or fires. The first step is to remove the engine cover followed by disconnecting both electrical connector and hoses that are connected to the EVAP canister purge valve. The tab must be activated to extract the valve. Install the new valve by conducting the reverse actions of removal. A leak test of the evaporative emission system and an evaporative emission repair verification drive cycle will confirm correct system operation after installation.

OEM 2005 Ford E-250 Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2005 Ford E-250 Purge Valve
Part Number: F7UZ-9C915-DA
$88.18 MSRP: $145.09
You Save: $56.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Emission Check Valve; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid
- Manufacturer Note: VMV Valve
- Base No.: 9C915
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.3 x 5.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-9C915-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2005 Ford E-250 Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-250 Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-250 Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford E-250 Canister Purge Valve Parts Questions & Experts Answers

Q: How to service and repair the evaporative emission canister purge valve on 2005 Ford E-250?
A: Amend the first step when servicing or repairing the evaporative emission canister purge valve by uninstalling the battery ground cable to lower the chances of fuel vapor explosions or fires. The first step is to remove the engine cover followed by disconnecting both electrical connector and hoses that are connected to the EVAP canister purge valve. The tab must be activated to extract the valve. Install the new valve by conducting the reverse actions of removal. A leak test of the evaporative emission system and an evaporative emission repair verification drive cycle will confirm correct system operation after installation.