Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Ford E-250 Canister Purge Valve

Vapor Canister Purge Valve EVAP
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

  • 2006 Ford E-250 Canister Purge Valve - F7UZ-9C915-DA
    2006 Ford E-250 Canister Purge Valve Diagram - F7UZ-9C915-DA
    View related parts

    2006 Ford E-250 Purge Valve Part Number: F7UZ-9C915-DA

    $88.18 MSRP: $145.09
    You Save: $56.91 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Valve Assembly; Emission Check Valve; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid
    • Manufacturer Note: VMV Valve
    • Base No.: 9C915
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 5.3 x 5.3 x 3.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F7UZ-9C915-DA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford E-250 Submodels:
    • Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2006 Ford E-250 Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Canister Purge Valve Parts Q&A

  • Q: How to service and repair the evaporative emission canister purge valve on 2006 Ford E-250?
    A: Service and repair of the evaporative emission canister purge valve, which is situated behind the axle fuel tank and midship fuel tank, requires disabling the battery ground cable due to the danger of fuel vapor explosions or fires. After removing the engine cover, disconnect both the electrical connector of the EVAP canister purge valve and all quick connect couplings of EVAP tubes. The EVAP canister purge valve can be taken off by pressing its tab. Inserting the new valve involves performing the reverse steps of removal. A leak test of the evaporative emission system must be performed following installation before performing the evaporative emission repair verification drive cycle.

Related 2006 Ford E-250 Parts

Alternate Year Models

+
2005 Ford E-250 Canister Purge Valve 2007 Ford E-250 Canister Purge Valve