How to service the blower motor resistor on 2005 Ford Escape?

Removal of the blower motor resistor In order to change the blower motor resistor, remove the right-hand A-pillar bottom trim first. Next, remove the electrical connector of the blower resistor. Pry out the two screws that connect the blower motor resistor and pull it out. Installation of the new resistor is only a matter of reversing the steps.

OEM 2005 Ford Escape Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2005 Ford Escape Blower Motor Resistor, Rear Part Number: 4L3Z-19A706-AA
$28.50 MSRP: $45.25
You Save: $16.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front, Rear; HVAC Blower Motor Regulator; Resistor
- Position: Rear
- Replaces: F4ZZ-19A706-A
- Base No.: 19A706
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-19A706-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2005 Ford Escape Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Blower Motor Resistor Parts Q&A

Q: How to service the blower motor resistor on 2005 Ford Escape?
A: Removal of the blower motor resistor In order to change the blower motor resistor, remove the right-hand A-pillar bottom trim first. Next, remove the electrical connector of the blower resistor. Pry out the two screws that connect the blower motor resistor and pull it out. Installation of the new resistor is only a matter of reversing the steps.