How to Service and Repair the Vapor Canister on 2005 Ford Escape?

Start the evaporative emission control canister servicing and repair by placing the vehicle in NEUTRAL position with a hoist under it. Disconnect the battery ground cable to reduce the chances of electrical sparks that might cause fuel vapor ignition. Open flames and smoking must be completely avoided in areas where fuel-related parts exist because the components contain highly combustible mixtures. The servicing of the evaporative emission (EVAP) canister vent solenoid requires the removal of its electrical connector together with the fuel vapor hose from the dust separator. The user must squeeze the fuel vapor tube quick connect coupling at the point away from its release tabs to disconnect it from the EVAP canister. Unbolt the EVAP canister assembly by removing two nuts along with three bolts. Replace the new canister by tightening its fasteners to 7 Nm (62 lb-in) while performing the removal steps in reverse order. Precise testing of evaporative emission systems through leak inspections followed by a drive cycle validation process verifies system operation effectiveness after installation.

OEM 2005 Ford Escape Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Canisters found

View related parts
2005 Ford Escape Vapor Canister
Part Number: 7L8Z-9D653-E
$205.44 MSRP: $349.09
You Save: $143.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Fuel Vapour; Vapor Canister Purge Solenoid; Canister Hose
- Replaced by: 5L8Z-9D653-BB
- Replaces: 7L8Z-9D653-C, CX-2135, 5L8Z-9S327-AA, 7L8Z-9S327-B, CX-1952, 7L8Z-9D653-D, 5L8Z-9D653-BA
- Base No.: 9G297
- Item Weight: 5.40 Pounds
- Item Dimensions: 7.7 x 7.7 x 24.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-9D653-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Vapor Canister
Part Number: F5AZ-9D653-A
$69.64 MSRP: $116.91
You Save: $47.27 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Manufacturer Note: Canister only
- Base No.: 9D653
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5AZ-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Vapor Canister
Part Number: 5L8Z-9D653-BB
$205.44 MSRP: $349.09
You Save: $143.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 8.50 Pounds
- Item Dimensions: 5.8 x 28.3 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9D653-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Vapor Canister
Part Number: 5M6Z-9D653-DA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Base No.: 9D653A
- Item Weight: 9.60 Pounds
- Item Dimensions: 8.5 x 21.8 x 20.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-9D653-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)

2005 Ford Escape Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Vapor Canister Parts Questions & Experts Answers

Q: How to Service and Repair the Vapor Canister on 2005 Ford Escape?
A: Start the evaporative emission control canister servicing and repair by placing the vehicle in NEUTRAL position with a hoist under it. Disconnect the battery ground cable to reduce the chances of electrical sparks that might cause fuel vapor ignition. Open flames and smoking must be completely avoided in areas where fuel-related parts exist because the components contain highly combustible mixtures. The servicing of the evaporative emission (EVAP) canister vent solenoid requires the removal of its electrical connector together with the fuel vapor hose from the dust separator. The user must squeeze the fuel vapor tube quick connect coupling at the point away from its release tabs to disconnect it from the EVAP canister. Unbolt the EVAP canister assembly by removing two nuts along with three bolts. Replace the new canister by tightening its fasteners to 7 Nm (62 lb-in) while performing the removal steps in reverse order. Precise testing of evaporative emission systems through leak inspections followed by a drive cycle validation process verifies system operation effectiveness after installation.