OEM 2004 Ford Escape Vapor Canister

2004 Ford Escape Vapor Canister Parts Questions & Experts Answers

• Q: How Should One Safely Service the Vapor Canister on 2004 Ford Escape?

  A: Users must maintain safety standards by keeping away from smoking or open flame exposures around fuel components because of the dangerous flammable vapors that exist in the evaporative emission control canister when performing servicing operations. Begin the service procedure by disconnecting the battery ground cable to prevent dangerous electrical sparks that might trigger fuel vapor ignition. The next step requires you to raise the vehicle after disconnecting the battery. The service process starts by disconnecting the outlet tube from the EVAP canister with removal of the canister vent solenoid electrical connector and the remote canister vent hose. Begin by removing the bracket from the EVAP canister then unplug all three parts which consist of the remote canister vent hose the dust separator and the canister vent solenoid. Terminate the EVAP canister itself during the last phase of removal. Lubricate all O-ring seals with MERPOL (R) O-Ring Seal Lubricant that fulfills Ford specification ESE-M99B144-B or any equivalent product according to installation requirements. Testing for leaks must occur along with completing the evaporative emission drive cycle to check system function after installing the parts.