How to service and repair the power window switch on 2005 Ford Excursion?

Service and repair procedures on the power window switch begin by disconnecting the battery ground cable. The left front door operational procedure aligns with that of the right front door since these doors both contain power windows and power mirrors. The door command center must be taken out of the door after which you should disconnect all the electrical connectors. Remove the door command center from the vehicle after disconnecting it from the vehicle. The first step is to eliminate the retaining clips on the mirror switch followed by switch removal. The installation process will be finished by performing the steps in opposite order to removal.

OEM 2005 Ford Excursion Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Window Switches found

View related parts
2005 Ford Excursion Window Switch, Passenger Side
Part Number: YF1Z-14529-ABA
$21.38 MSRP: $33.95
You Save: $12.57 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch - Window Control - Single; Front Right Door Window Switch; Rear Door Window Switch; Center Sunroof Switch; Switch Assembly; Sunroof Switch; Switch; Door Window Switch
- Position: Passenger Side
- Replaces: YF1Z-14529-AA
- Base No.: 14529
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-14529-ABA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford Excursion Window Switch, Front Driver Side
Part Number: 1L2Z-14529-BA
$139.75 MSRP: $225.45
You Save: $85.70 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch - Window Control - Double; Door Window Switch, Front Left; Door Window Switch
- Position: Front Driver Side
- Base No.: 14529
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.6 x 7.8 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-14529-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford Excursion Window Switch
Part Number: XL1Z-14529-DA
Product Specifications
- Other Name: Switch Assembly; Switch
- Manufacturer Note: RH & LH, rear flip vent window, w/overhead console
- Base No.: 14529
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL1Z-14529-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2005 Ford Excursion Window Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion Window Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion Window Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Excursion Window Switch Parts Questions & Experts Answers

Q: How to service and repair the power window switch on 2005 Ford Excursion?
A: Service and repair procedures on the power window switch begin by disconnecting the battery ground cable. The left front door operational procedure aligns with that of the right front door since these doors both contain power windows and power mirrors. The door command center must be taken out of the door after which you should disconnect all the electrical connectors. Remove the door command center from the vehicle after disconnecting it from the vehicle. The first step is to eliminate the retaining clips on the mirror switch followed by switch removal. The installation process will be finished by performing the steps in opposite order to removal.