How to Service and Repair the Camshaft Position Sensor on 2005 Ford Excursion?

The service process for camshaft position (CMP) sensor starts by disconnecting the battery ground cable. You should disconnect the electrical connection of the CMP sensor next. You need to first remove the bolt holding the CMP sensor before taking the sensor outside. The new sensor needs installation through the opposite order of removal steps.

OEM 2005 Ford Excursion Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2005 Ford Excursion Camshaft Position Sensor
Part Number: 1W7Z-6B288-AB
$31.89 MSRP: $50.64
You Save: $18.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor; Position Sensor; Camshaft Position Sen
- Replaces: 1W7Z-6B288-AA
- Base No.: 6B288
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6B288-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2005 Ford Excursion Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Excursion Camshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Camshaft Position Sensor on 2005 Ford Excursion?
A: The service process for camshaft position (CMP) sensor starts by disconnecting the battery ground cable. You should disconnect the electrical connection of the CMP sensor next. You need to first remove the bolt holding the CMP sensor before taking the sensor outside. The new sensor needs installation through the opposite order of removal steps.