How to service and repair the A/C Hose from the condenser to the evaporator on 2005 Ford Explorer?

Service and repair of condenser to evaporator line starts with removing the air cleaner and air cleaner outlet tube followed by the suction accumulator. The service process includes refrigerant recovery followed by removing the three coolant bottle bolts which should be tightened to 9 Nm (80 lb-in) when reinstalling them. First remove dash panel A/C line bracket nut then tighten it to 11 Nm (8 lb-ft), perform the same operation for fender splash shield A/C line bracket nut. Remove the two A/C line fittings by first discarding the O-ring seals before removing the A/C fitting nut which also requires new O-ring seals at installation time while tightening it to 8 Nm (71 lb-in). During new line installation reverse the removal order by using new mineral oil-lubricated O-ring seals and applying the correct amount of PAG Refrigerant Compressor Oil F7AZ-19589-DA (Motorcraft YN-12-C) or WSH-M1C231-B equivalent from Ford specifications. To finish the process the technician should evacuate the system followed by leak testing before charging the system with refrigerant. The R-134a refrigerant system O-ring seals benefit from mineral oil-based F73Z-19577-AA (Motorcraft YN-9-A) while this product does not qualify to lubricate R-134a refrigerant system compressors. A replacement suction accumulator should be installed only to fix contamination resulting from an A/C compressor failure or damage or if it fails a leak test.

OEM 2005 Ford Explorer A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 A/C Hoses found

View related parts
2005 Ford Explorer Tube Assembly, Rear Part Number: 6L2Z-19867-AA
$44.71 MSRP: $61.85
You Save: $17.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Refrigerant Hose, Rear; A/C Hose
- Position: Rear
- Replaces: 1L2Z-19867-AA
- Base No.: 19867
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.3 x 9.5 x 21.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-19867-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Hose & Tube Assembly, Front Part Number: 2L2Z-19835-EA
$113.93 MSRP: $155.03
You Save: $41.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
- Position: Front
- Base No.: 19835B
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.4 x 17.4 x 45.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-19835-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Liquid Line Part Number: 4L2Z-19835-EB
$78.24 MSRP: $108.24
You Save: $30.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 4L2Z-19835-EA, YF-3075
- Base No.: 19835A
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.5 x 19.4 x 42.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-19835-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer A/C Hose Part Number: 6L2Z-19835-FA
Product Specifications
- Other Name: Tube Assembly; Hose
- Replaces: 1L2Z-19835-AE
- Base No.: 19835
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 7.1 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-19835-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Discharge Line, Front Part Number: 1L2Z-19D850-EA
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Tube - Compressor To Manifold
- Position: Front
- Base No.: 19D850
- Item Weight: 5.10 Pounds
- Item Dimensions: 4.3 x 29.3 x 30.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-19D850-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Discharge Line, Front Part Number: 1L2Z-19D850-AA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Position: Front
- Base No.: 19D850
- Item Weight: 5.70 Pounds
- Item Dimensions: 29.6 x 29.0 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-19D850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Explorer Hose & Tube Assembly, Front Part Number: 2L2Z-19835-FA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
- Position: Front
- Base No.: 19835B
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.7 x 19.4 x 43.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-19835-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Discharge Line, Front Part Number: 1L2Z-19D850-DA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Position: Front
- Base No.: 19D850
- Item Weight: 6.10 Pounds
- Item Dimensions: 12.5 x 16.8 x 33.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-19D850-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Explorer Discharge Line, Front Part Number: 1L2Z-19D850-BA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Position: Front
- Base No.: 19D850
- Item Weight: 4.20 Pounds
- Item Dimensions: 22.7 x 4.3 x 47.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-19D850-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Hose & Tube Assembly, Front Part Number: 1L2Z-19837-AB
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: With P-Nut/Bolt Fitting At Manifold And Tube Connection
- Position: Front
- Base No.: 19837
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.6 x 21.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-19837-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Ford Explorer A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Explorer A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Explorer A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Explorer A/C Hose Parts Q&A

Q: How to service and repair the A/C Hose from the condenser to the evaporator on 2005 Ford Explorer?
A: Service and repair of condenser to evaporator line starts with removing the air cleaner and air cleaner outlet tube followed by the suction accumulator. The service process includes refrigerant recovery followed by removing the three coolant bottle bolts which should be tightened to 9 Nm (80 lb-in) when reinstalling them. First remove dash panel A/C line bracket nut then tighten it to 11 Nm (8 lb-ft), perform the same operation for fender splash shield A/C line bracket nut. Remove the two A/C line fittings by first discarding the O-ring seals before removing the A/C fitting nut which also requires new O-ring seals at installation time while tightening it to 8 Nm (71 lb-in). During new line installation reverse the removal order by using new mineral oil-lubricated O-ring seals and applying the correct amount of PAG Refrigerant Compressor Oil F7AZ-19589-DA (Motorcraft YN-12-C) or WSH-M1C231-B equivalent from Ford specifications. To finish the process the technician should evacuate the system followed by leak testing before charging the system with refrigerant. The R-134a refrigerant system O-ring seals benefit from mineral oil-based F73Z-19577-AA (Motorcraft YN-9-A) while this product does not qualify to lubricate R-134a refrigerant system compressors. A replacement suction accumulator should be installed only to fix contamination resulting from an A/C compressor failure or damage or if it fails a leak test.