OEM 2005 Ford Explorer Sport Trac Ignition Lock Cylinder

2005 Ford Explorer Sport Trac Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to service a non-functional Ignition Lock Cylinder on 2005 Ford Explorer Sport Trac?

  A: Start the lock cylinder service by positioning the front wheels straight ahead and removing the steering wheel assembly and then twist off the lock cylinder cover. The first step involves removing the cap covering the ignition switch cylinder through twisting. The lock repair package F85Z-11582-AA contains directions to fabricate a new lock cylinder which will match the current key code of the vehicle. The inoperative lock cylinder needs to be replaced using this package. Malfunctioning ignition switch lock cylinders require drilling the retaining pin out with a 1/8-inch drill bit followed by drilling at the ignition key slot center with a 3/8-inch drill until lock release before disposing of the lock cylinder. Throw away the existing ignition switch lock cylinder while cleaning the drill particles from the steering column. After removing the bearing retainer you should proceed to the bearing and gear and check all drill shavings are fully removed from the steering column before inspecting for any damage. The last step of installation involves using removal reversal to put back the ignition switch lock cylinder followed by testing its operational functionality.