FordParts
My Garage
My Account
Cart
OEM 2005 Ford F-150 Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2005 Ford F-150 Alternator Part Number: 6U2Z-10V346-GGRM
$230.85 MSRP: $367.27You Save: $136.42 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 6U2Z-10V346-BBRM, 7L3Z-10346-BARM, 7L3Z-10346-BRM, GLV-8629-RM, GL-8744-RM, GLV-8716-RM, GLV-9053-RM, 6L3Z-10V346-BARM, GLV-8771-RM, 7L3Z-10346-CARM, 6U2Z-10V346-EMRM, 7L3Z-10346-B, 6L3Z-10V346-BBRM, GL-975-RM, GL-8864-RM, GL-923
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-10V346-GGRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-150 Alternator Part Number: 7L3Z-10346-FRM
$261.58 MSRP: $418.18You Save: $156.60 (38%)Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 7L3Z-10346-AARM, 7L3Z-10346-CRM, 7L3Z-10346-A, GL-8863-RM, 7L3Z-10346-ARM, GL-922, GL-974-RM, GL-8743-RM
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-10346-FRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-150 Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford F-150 Alternator Parts Q&A
- Q: How to service the alternator on 2005 Ford F-150?A: The service process of the alternator begins by disconnecting the battery. Proceed to turn the front end accessory drive belt tensioner counterclockwise and set its belt to the side. First disconnect the electrical connector from the generator then move the protective B+ boot to the side and remove the nut connected to the generator B+ terminal while tightening it to 8 Nm (71 lb-in) before installation. The A/C line bracket needs its nut removed while setting it aside before installation where the nut must be tightened to 25 Nm (18 lb-ft). You should also remove the nut and place the generator harness bracket to the side before tightening it with 25 Nm (18 lb-ft) torque upon reinstalling. When reinstalling replace the two generator stud bolts with torque strength set to 48 Nm (35 lb-ft). Remove the bolt after taking out the generator and reinstallation should be completed by tightening it to 48 Nm (35 lb-ft). Execute the completion of installation by following the steps in the reverse order of removal.