FordParts
My Garage
My Account
Cart
OEM 2006 Ford F-150 Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2006 Ford F-150 Alternator Part Number: 6U2Z-10V346-GGRM
$230.85 MSRP: $367.27You Save: $136.42 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 6U2Z-10V346-BBRM, 7L3Z-10346-BARM, 7L3Z-10346-BRM, GLV-8629-RM, GL-8744-RM, GLV-8716-RM, GLV-9053-RM, 6L3Z-10V346-BARM, GLV-8771-RM, 7L3Z-10346-CARM, 6U2Z-10V346-EMRM, 7L3Z-10346-B, 6L3Z-10V346-BBRM, GL-975-RM, GL-8864-RM, GL-923
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-10V346-GGRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-150 Alternator Part Number: 7L3Z-10346-FRM
$261.58 MSRP: $418.18You Save: $156.60 (38%)Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 7L3Z-10346-AARM, 7L3Z-10346-CRM, 7L3Z-10346-A, GL-8863-RM, 7L3Z-10346-ARM, GL-922, GL-974-RM, GL-8743-RM
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-10346-FRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-150 Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-150 Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-150 Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-150 Alternator Parts Q&A
- Q: How to service the alternator on 2006 Ford F-150?A: The primary step when servicing the alternator is battery disconnection. The front end accessory drive belt tensioner requires counterclockwise rotation before setting the front end accessory drive belt to the side. Disconnect the electrical connector from the generator before moving the B+ protective boot to the side and removing the nut from the B+ terminal. Tighten this terminal to 8 Nm when reinstalling. The A/C line bracket should be removed after its nut is taken off while torqueing it to 25 Nm (18 lb-ft) upon reinstallation. Proper installation of the generator harness bracket requires removing the nut and placing it aside before tightening to 25 Nm (18 lb-ft). Reinstall the two generator stud bolts by following torque specifications of 48 Nm (35 lb-ft). The last step requires you to remove the bolt with the generator while tightening both components to 48 Nm (35 lb-ft) during reinstallation. Recovery from the removal process can be achieved by implementing the reverse steps.