FordParts
My Garage
My Account
Cart
OEM 2005 Ford F-150 Knock Sensor
Engine Knock Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Knock Sensors found
2005 Ford F-150 Knock Sensor Part Number: XL3Z-12A699-AA
$36.36 MSRP: $56.75You Save: $20.39 (36%)Product Specifications- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-150 Knock Sensor Part Number: 2R3Z-12A699-AA
$28.65 MSRP: $44.33You Save: $15.68 (36%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.20 Pounds
- Item Dimensions: 9.1 x 7.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2R3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-150 Knock Sensor Part Number: 4L3Z-12A699-AA
$55.59 MSRP: $88.27You Save: $32.68 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-150 Knock Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford F-150 Knock Sensor Parts Q&A
- Q: How to service the knock sensor (KS) on 2005 Ford F-150?A: Service of the knock sensor (KS) requires putting the vehicle into neutral position on a hoist first. Begin by disconnecting the battery ground cable followed by removing the bolt fastening the fuel tube bracket which you should then set aside. The KS electrical connector needs to be undone first before removing its mounting bolt for KS removal. Follow these steps to install the new KS while tightening the bolt to 20 Nm (15 lb-ft) torque value before finishing the installation through the reversal of removal steps.