My Garage
Cart
Make sure this part fits

Ford XL3Z-12A699-AA
Knock Sensor

1998-2019 Ford XL3Z12A699AA

Customer Questions & Expert Answers (16)
Ford XL3Z-12A699-AA Knock Sensor
Ford XL3Z-12A699-AA Knock Sensor
  • Part Description
    Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
  • Base No.
    12A699
  • Manufacturer
    Ford
Make sure this part fits
$36.36 MSRP: $56.75
You Save: $20.39 (36%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2011 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor, S, Special Edition8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    2003-2014 Ford E-150Base, Chateau, XL, XLT8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2000-2002 Ford E-150 EconolineBase, XL
    2000-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT
    2003-2014 Ford E-250Base8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2002 Ford E-250 Econoline
    2003 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS
    2000-2002 Ford E-350 Econoline Club WagonChateau, Custom, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2000-2019 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2000-2005 Ford ExcursionEddie Bauer, Limited, XLS, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Do you think this XL3Z-12A699-AA will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number XL3Z-12A699-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after installing the new KS for the 2007 Ford E-150? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service the knock sensor (KS) for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    How do you install the Knock Sensor for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service and repair the knock sensor (KS) for the 2005 Ford E-250? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    How do you install the Knock Sensor for the 2002 Ford E-250 Econoline? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What should be done after removing the upper intake manifold for the 2001 Ford Excursion? Posted by Customer
    A:
    Disconnect the Knock Sensor (KS) electrical connector and remove the bolt securing the KS.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service the knock sensor (KS) for the 2004 Ford Expedition? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What should be done after removing the intake manifold for the 2004 Ford F-150? Posted by Customer
    A:
    Remove the components in the order indicated in the accompanying illustration and table.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What should be done after removing the intake manifold for the 2004 Ford F-150 Heritage? Posted by Customer
    A:
    Disconnect the electrical connector from the knock sensor and remove the nut securing the KS.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service the knock sensor (KS) for the 2004 Ford F-250 Super Duty? Posted by Customer
    A:
    Remove the upper intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    How should the knock sensor (KS) be positioned during installation for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Ensure that the black tapered side of the KS is facing up.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service and repair the knock sensor for the 2002 Lincoln Blackwood? Posted by Customer
    A:
    Remove the lower intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service and repair the Knock Sensor for the 2000 Lincoln Navigator? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What should be done after installing the new KS for the 2009 Mercury Grand Marquis? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    Q:
    What is the first step to service the Knock Sensor (KS) for the 2009 Lincoln Town Car? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Knock Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Knock Sensor XL3Z-12A699-AA Designed for Proper Fit and Performance

The Ford part XL3Z-12A699-AA Knock Sensor as a genuine Ford Knock Sensor component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford XL3Z-12A699-AA Knock Sensor is used with Ford F-150, Excursion, Expedition vehicles and Mercury Grand Marquis, Marauder models and Lincoln Town Car, Navigator, Blackwood models. The original Ford part will bear the manufacturer part number: XL3Z-12A699-AA and where it is made at Ford. It has the code: 12A699.
This component has dimensions of 6.3 x 2.5 x 2.5 inches and its weight is approximately 0.40 Pounds. The part XL3Z12A699AA is available in New condition while meeting the standards of the product rating. The Sensor - Engine Knock; Ignition Knock (Detonation) Sensor belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part XL3Z-12A699-AA can be vital. The inventory reference for this item is SKU: XL3Z-12A699-AA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.