Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 4L3Z-12A699-AA
Knock Sensor

2004-2014 Ford 4L3Z12A699AA

Customer Questions & Expert Answers (16)
Ford 4L3Z-12A699-AA Knock Sensor
Ford 4L3Z-12A699-AA Knock Sensor
Ford 4L3Z-12A699-AA Knock Sensor
Ford 4L3Z-12A699-AA Knock Sensor
  • Part Description
    Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
  • Base No.
    12A699
  • Manufacturer
    Ford
Make sure this part fits
$55.59 MSRP: $88.27
You Save: $32.68 (38%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2005 Lincoln Navigator Knock Sensor Diagram for 4L3Z-12A699-AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4L3Z-12A699-AA

  • Product Specifications

    BrandGenuine Ford
    Base No.12A699
    Manufacturer Part Number4L3Z-12A699-AA
    Part DescriptionSensor - Engine Knock; Ignition Knock (Detonation) Sensor
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU4L3Z-12A699-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2012 Ford EscapeLimited, XLT6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
    2005-2014 Ford ExpeditionEddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLS, XLT, XLT Sport8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2004-2010 Ford F-150FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2004 Ford F-150 HeritageSVT Lightning, XL, XLT8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2005-2010 Ford F-250 Super DutyCabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
    2005-2010 Ford F-350 Super DutyCabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
    2010 Ford FusionSE, SEL6 Cyl 3.0 L FLEX
    2007-2010 Ford MustangBullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2006-2008 Lincoln Mark LTBase8 Cyl 5.4 L GAS
    2005-2014 Lincoln NavigatorBase, L, L Luxury, L Ultimate, Luxury, Ultimate8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 4L3Z-12A699-AA compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 4L3Z-12A699-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the Knock Sensor (KS) on a 4.6L (3V) engine on Ford F-150? Posted by Customer
    A:
    The first step to working on a 4.6L (3V) engine Knock Sensor (KS) is removing the intake manifold from the engine. The first step requires detachment of the KS electrical connector and removal of all the securing bolts holding the KS in place. Tighten the bolts on the new KS installation to 20 Nm (177 lb-in) before following all steps backward for completing the installation.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the knock sensor (KS) on Ford F-350 Super Duty? Posted by Customer
    A:
    Start service of the knock sensor by taking out the intake manifold. The first step must involve disconnecting the electrical connector from the knock sensor. Detach the two bolts from the knock sensor as the next step before you remove the sensor itself. The sensor installation requires tight screwing to 20 Nm torque (15 lb-ft) followed by reversing all steps of removal to finish the installation.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the knock sensor (KS) on Ford F-250 Super Duty? Posted by Customer
    A:
    Service of the knock sensor (KS) begins with removing the intake manifold followed by disconnecting KS electrical connectors. Another step requires the removal of both bolts followed by the two KS units. Use 20 Nm torque when installing each bolt before finishing the installation through reversal of the previous removal steps.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the Knock Sensor (KS) on the 4.0L SOHC engine on Ford Mustang? Posted by Customer
    A:
    The service of the Knock Sensor (KS) on the 4.0L SOHC engine requires removing the intake manifold as the first step. The Knock Sensor electrical connector needs to be separated before continuing. Uninstall the Knock Sensor by dislodging its securing bolt from the sensor itself. The Knock Sensor installation requires torqueing it up to 20 Nm (177 lb-in) followed by performing the reversal of the removal process for completion of the installation.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the knock sensor (KS) on Lincoln Mark LT? Posted by Customer
    A:
    Service of the knock sensor (KS) begins by taking out the intake manifold. First disconnect all electrical plugs connected to the knock sensor. After disconnecting the electrical connectors you should take out the bolts before removing the two knock sensors. Install the new sensors by tightening them to 20 Nm (15 lb-ft) torque value before reinstalling them according to the removal steps.
    Posted by FordPartsDeal Specialist
    Q:
    How to Properly Maintain and Replace the Knock Sensor in a Lincoln Navigator? Posted by Customer
    A:
    Beginning service of the Knock Sensor (KS) requires first removing the intake manifold. The service procedure begins by disconnecting KS electrical connectors followed by two bolt removal and extraction of both KS units. Tighten the bolts of the new KS to 20 Nm (177 lb-in) after finishing the installation by reversing the removal steps.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the knock sensor (KS) on Lincoln Navigator? Posted by Customer
    A:
    The service procedure for the knock sensor (KS) starts with intake manifold removal. The service of knock sensors begins with disconnecting their electrical connectors. The next task requires the removal of two bolts as well as two knock sensors. During installation of new sensors it is vital to tighten bolts to 20Nm (15lb-ft) before proceeding with the removal steps in reverse.
    Posted by FordPartsDeal Specialist
    Q:
    What should be removed after positioning for the 2009 Mercury Mariner? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What is the first step to service the knock sensor (KS) for the 2004 Ford F-150 Heritage? Posted by Customer
    A:
    Remove the intake manifold.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2005 Ford F-150? Posted by Customer
    A:
    Remove the bolt to take out the KS.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What should be done to remove the knock sensor for the 2006 Ford F-150? Posted by Customer
    A:
    Remove the bolt holding the KS in place.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2009 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove the two bolts securing both the right-hand and left-hand Knock Sensors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What should be done after installing the new KS for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    How do you disconnect the knock sensor for the 2008 Ford F-150? Posted by Customer
    A:
    Disconnect the electrical connector from the knock sensor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    Q:
    What should be done after disconnecting the battery ground cable for the 2007 Ford Mustang? Posted by Customer
    A:
    Remove the intake manifold and disconnect the KS electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Knock Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 4L3Z-12A699-AA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 4L3Z-12A699-AA Knock Sensor. It is sometimes referred to as Ford Knock Sensor. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 4L3Z12A699AA Knock Sensor. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery