How to service and repair the evaporative emission canister purge valve on 2005 Ford F-250 Super Duty?

To replace the evaporative emission canister purge valve, disconnect the battery ground, electrical connector and the fuel vapor tubes. Installation: To install the new valve, take out the old valve and reverse the procedure to install the new one; make sure that you do a leak test and verification drive cycle to check the functionality of the new valve.

OEM 2005 Ford F-250 Super Duty Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2005 Ford F-250 Super Duty Purge Solenoid Part Number: F81Z-9C915-AAA
$110.50 MSRP: $181.82
You Save: $71.32 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve
- Manufacturer Note: VMV valve only
- Base No.: 9C915
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.1 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-9C915-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2005 Ford F-250 Super Duty Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-250 Super Duty Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-250 Super Duty Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-250 Super Duty Canister Purge Valve Parts Q&A

Q: How to service and repair the evaporative emission canister purge valve on 2005 Ford F-250 Super Duty?
A: To replace the evaporative emission canister purge valve, disconnect the battery ground, electrical connector and the fuel vapor tubes. Installation: To install the new valve, take out the old valve and reverse the procedure to install the new one; make sure that you do a leak test and verification drive cycle to check the functionality of the new valve.