How to Service and Repair the Vapor Canister on 2005 Ford Focus?

Service and repair tasks on the evaporative emission control canister should begin by disconnecting the battery ground cable to prevent possible fuel vapor explosions or fires. The service requires positioning the vehicle in neutral on a hoist before disconnecting the EVAP vent solenoid electrical connector and EVAP tube. Try to detach the vapor tube retainer from the EVAP canister before you push the quick release tab to detach the vapor tube. The installation of the EVAP canister requires removing its securing nuts before removing the component completely. Installation of the new canister requires following the removal steps backward. Perform the evaporative emission repair verification drive cycle and do an evaporative emission system leak test after completion to verify proper operation.

OEM 2005 Ford Focus Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Canisters found

View related parts
2005 Ford Focus Vapor Canister Part Number: 7S4Z-9D653-A
$344.28 MSRP: $560.00
You Save: $215.72 (39%)
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Replaces: 5S4Z-9D653-CA, 6S4Z-9D653-AA
- Base No.: 9D653A
- Item Weight: 6.50 Pounds
- Item Dimensions: 11.5 x 8.1 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- S, SE, SES, ST, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2005 Ford Focus Vapor Canister Part Number: F87Z-9D653-CA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.10 Pounds
- Item Dimensions: 6.7 x 5.5 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-9D653-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
2005 Ford Focus Vapor Canister Part Number: 7S4Z-9D653-B
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Replaces: 6S4Z-9D653-BA
- Base No.: 9D653A
- Item Weight: 7.80 Pounds
- Item Dimensions: 8.5 x 14.6 x 19.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-9D653-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
2005 Ford Focus Vapor Canister Part Number: 3S4Z-9D653-BA
Product Specifications
- Other Name: Cannister - Fuel Vapour; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: This is a complete assembly-includes filter, canister, bracket, solenoid, hose, spring and clip. Located under vehicle. No serviceable components. For buffer canister, refer to 9G479., PZEV, 3DR/5DR
- Base No.: 9D653
- Item Weight: 4.80 Pounds
- Item Dimensions: 7.8 x 11.7 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- ST, SVT, ZX3, ZX4 ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2005 Ford Focus Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Focus Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Focus Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Focus Vapor Canister Parts Q&A

Q: How to Service and Repair the Vapor Canister on 2005 Ford Focus?
A: Service and repair tasks on the evaporative emission control canister should begin by disconnecting the battery ground cable to prevent possible fuel vapor explosions or fires. The service requires positioning the vehicle in neutral on a hoist before disconnecting the EVAP vent solenoid electrical connector and EVAP tube. Try to detach the vapor tube retainer from the EVAP canister before you push the quick release tab to detach the vapor tube. The installation of the EVAP canister requires removing its securing nuts before removing the component completely. Installation of the new canister requires following the removal steps backward. Perform the evaporative emission repair verification drive cycle and do an evaporative emission system leak test after completion to verify proper operation.