What Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2005 Ford Freestar?

Wear safety glasses when servicing the Clock Spring assembly and take care of air bag modules. Wash hands after deployment. Disarm, take off steering wheel, errase and cut covers. Unhook the Clock Spring, and make sure to keep it centred when it is attached. Install components, screw them to torque requirement and re-power the system.

OEM 2005 Ford Freestar Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clock Spring found

View related parts
2005 Ford Freestar Clockspring Part Number: 5F2Z-14A664-AA
$278.68 MSRP: $409.22
You Save: $130.54 (32%)
Product Specifications
- Other Name: Cover And Contact Plate Assembly; Air Bag Clockspring
- Replaces: 3F2Z-14A664-AA
- Base No.: 14A664
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.4 x 6.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-14A664-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Clock Spring

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Clock Spring available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Clock Spring as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Clock Spring Parts Q&A

Q: What Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2005 Ford Freestar?
A: Wear safety glasses when servicing the Clock Spring assembly and take care of air bag modules. Wash hands after deployment. Disarm, take off steering wheel, errase and cut covers. Unhook the Clock Spring, and make sure to keep it centred when it is attached. Install components, screw them to torque requirement and re-power the system.