How to Service the Oil Pressure Switch on 2005 Ford Freestar?

In order to service the oil pressure switch, cleanliness must be promoted to prevent contamination. Disassemble the generator, idler pulley accessory drive belt and generator brace bolt, screwing them back 47 Nm tight. Take out the A/C compressor mounting bracket brace and unhook the oil pressure switch and tighten it to 27 Nm when fitting. Undo the process to do it.

OEM 2005 Ford Freestar Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Ford Freestar Oil Pressure Sending Unit Part Number: 6U5Z-9278-K
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch
- Replaces: 1U5Z-9278-FA
- Base No.: 9278
- Item Weight: 0.20 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U5Z-9278-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2005 Ford Freestar?
A: In order to service the oil pressure switch, cleanliness must be promoted to prevent contamination. Disassemble the generator, idler pulley accessory drive belt and generator brace bolt, screwing them back 47 Nm tight. Take out the A/C compressor mounting bracket brace and unhook the oil pressure switch and tighten it to 27 Nm when fitting. Undo the process to do it.