My Garage
Cart

OEM 2005 Ford Freestar Alternator

Generator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator found

  • 2005 Ford Freestar Alternator - 6F2Z-10346-BBRM
    2005 Ford Freestar Alternator Diagram - 6F2Z-10346-BBRM
    View related parts
    Product Specifications
    • Other Name: Alternator Assembly
    • Replaces: 6F2Z-10346-BA, GL-986-RM, 6F2Z-10346-BARM, GL-900
    • Base No.: 10346
    • Item Weight: 15.60 Pounds
    • Item Dimensions: 7.1 x 7.8 x 10.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6F2Z-10346-BBRM
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford Freestar Submodels:
    • Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Alternator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Alternator Parts Q&A

  • Q: How to Ensure Proper Functioning of the Alternator in a 2005 Ford Freestar?
    A: The first step for alternator servicing and repair requires placing the vehicle in neutral position with an elevated position on a hoist. First disconnect the battery then store the accessory drive belt in position by counterclockwise turning the tensioner while pushing its spring clip toward the tensioner. Services on the generator start with releasing the wiring harness locator followed by generator electrical connector removal. Separate the generator B+ cable boot and use a proper tool to remove the B+ cable nut before reinstallation where correct torque setting should be 8 Nm (71 lb-in). The generator requires removal of its three securing bolts before installation when bolts need to be fastened to 47 Nm (35 lb-ft) torque. To finish the installation reverse all steps of removal.