FordParts
My Garage
My Account
Cart
OEM 2005 Ford Mustang Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Axle Shafts found
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Base No.: 4238
- Item Weight: 23.00 Pounds
- Item Dimensions: 36.7 x 8.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Base No.: 4238
- Item Weight: 25.10 Pounds
- Item Dimensions: 41.2 x 8.3 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Base No.: 4238
- Item Weight: 22.60 Pounds
- Item Dimensions: 38.0 x 7.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Base No.: 4238
- Item Weight: 23.30 Pounds
- Item Dimensions: 37.6 x 7.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Replaces: 5R3Z-4234-DA
- Base No.: 4238
- Item Weight: 23.50 Pounds
- Item Dimensions: 37.3 x 7.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Replaces: 5R3Z-4234-DB
- Base No.: 4238
- Item Weight: 23.40 Pounds
- Item Dimensions: 36.9 x 7.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Mustang Axle Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Mustang Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Mustang Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Mustang Axle Shaft Parts Q&A
- Q: How to service and repair the axle shaft with an 8.8-inch ring gear differential on 2005 Ford Mustang?A: You should start servicing an 8.8-inch ring gear differential axle shaft by using a hoist and neutral transmission to suspend a vehicle while removing wheels and tires first. The differential housing cover must be unfastened before removing the two disc brake caliper bolts to place the caliper next to a support structure using mechanic's wire. The service starts by removing brake pads which are followed by disc brake caliper anchor bolts and the anchor unit and ends by taking the brake disc off. It is vital to free the anti-lock sensor bolt together with the sensor from the hub prior to taking out the axle shaft U-washer in order to protect the sensor. The user must remove the differential pinion shaft after discarding the lock bolt then extracting the shaft. Extract the U-washer and axle shaft by following the right direction but avoid harming the rubber O-ring which exists in the parallel grooves. Installation demands preparing the lip of the axle shaft oil seal with grease before positioning the axle shaft without touching the seal. Installation of the U-washer requires positioning it on the button-end of the axle shaft followed by extending the shaft outward. You can use Threadlock and Sealer to coat the threads of the former lock bolt if no new one is available during differential pinion shaft installation. Then line up the shaft while securing it with a fresh lock bolt torqued to 30 Nm. Anti-seize lubricant should be applied to the sensor body before installation of the anti-lock sensor along with proper tightening to 7 Nm (62 inch lbs.). Install the brake disc after putting back the disc brake caliper anchor along with its two bolts that require a torque setting of 103 Nm (76 ft. lbs.). The service steps included installing disc brake pads followed by the disc brake caliper which received two bolts tightened to 33 Nm (25 ft. lbs.) After that, install the differential housing cover and set the tire and wheel assembly in place.
Related 2005 Ford Mustang Parts
2005 Ford Mustang Control Arm
2005 Ford Mustang Coil Springs
2005 Ford Mustang Coil Spring Insulator
2005 Ford Mustang Control Arm Bushing
2005 Ford Mustang Shock Absorber
2005 Ford Mustang Shock And Strut Mount
2005 Ford Mustang Sway Bar Bushing
2005 Ford Mustang Sway Bar Kit
2005 Ford Mustang Sway Bar Link
2005 Ford Mustang Trailing Arm Bushing
2005 Ford Mustang Wheel Seal
2005 Ford Mustang Wheel Stud