How to service the knock sensor (KS) on 2005 Ford Mustang?

To service the knock sensor (KS), open by removing the battery ground cable. Next, disconnect the intake manifold and de-plug the KS electrical connector. The following step is to remove the bolt that holds the KS and take off the sensor. Installation To install, reverse the removal procedure, but make sure the KS is tightened to 20 Nm (15 lb-ft).

OEM 2005 Ford Mustang Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2005 Ford Mustang Knock Sensor Part Number: 1L2Z-12A699-AA
$96.98 MSRP: $154.00
You Save: $57.02 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Manufacturer Note: Dual headed Bolt on type sensor
- Base No.: 12A699
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.9 x 1.8 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT | 8 Cyl 4.6 L GAS
View related parts
2005 Ford Mustang Knock Sensor Part Number: XL3Z-12A699-BA
$45.32 MSRP: $70.73
You Save: $25.41 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 2.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-12A699-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS

2005 Ford Mustang Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Mustang Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Mustang Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Mustang Knock Sensor Parts Q&A

Q: How to service the knock sensor (KS) on 2005 Ford Mustang?
A: To service the knock sensor (KS), open by removing the battery ground cable. Next, disconnect the intake manifold and de-plug the KS electrical connector. The following step is to remove the bolt that holds the KS and take off the sensor. Installation To install, reverse the removal procedure, but make sure the KS is tightened to 20 Nm (15 lb-ft).