How to Service and Repair the Power Steering Cooler on 2005 Ford Mustang?

First prepare the power steering cooler repair by positioning the vehicle with NEUTRAL transmission on a hoist. The clamp can be removed to disconnect the cooler-to-reservoir hose so that the fluid can drain into a suitable storage container. The detachment of return line-to-cooler hose must be accomplished after clamp release. The pin-retainer of the cooler pressure line should be removed from the stabilizer bar bracket before removing the two cooler nuts and the cooler itself. Position the new installation with 8 Nm (71 inch lbs.) torque. Finish the operation by returning to the removal process and performing power steering system filling.

OEM 2005 Ford Mustang Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2005 Ford Mustang Oil Cooler, Front
Part Number: 4R3Z-3D746-AA
Product Specifications
- Other Name: Coil - Cooling; Power Steering Cooler, Front; Power Steering Return Hose; Power Steering Cooler
- Position: Front
- Base No.: 3D746
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-3D746-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Mustang Submodels:
- Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Ford Mustang Power Steering Cooler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Mustang Power Steering Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Mustang Power Steering Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Mustang Power Steering Cooler Parts Questions & Experts Answers

Q: How to Service and Repair the Power Steering Cooler on 2005 Ford Mustang?
A: First prepare the power steering cooler repair by positioning the vehicle with NEUTRAL transmission on a hoist. The clamp can be removed to disconnect the cooler-to-reservoir hose so that the fluid can drain into a suitable storage container. The detachment of return line-to-cooler hose must be accomplished after clamp release. The pin-retainer of the cooler pressure line should be removed from the stabilizer bar bracket before removing the two cooler nuts and the cooler itself. Position the new installation with 8 Nm (71 inch lbs.) torque. Finish the operation by returning to the removal process and performing power steering system filling.