How to service the 60 percent bench seat armrest on 2005 Ford Ranger?

The first step for servicing the 60 percent bench seat armrest requires depowering the supplemental restraint system (SRS) to maintain safety because the safety belt pretensioner operates using pyrotechnics. Safety glasses must be worn by everyone during this operation. Mark the position of safety belt buckle pretensioner wire harness connections as you remove the 60 percent bench seat and write down routing paths which will be needed for reinstallation. First disconnect the safety belt buckle pretensioner electrical connector after removing its anchor clips. Then guide the wire harness through the seat frame. The safety belt buckle pretensioner cover screw needs removal followed by the cover together with the removing of the safety belt buckle pretensioner nut to complete the operation. Unfasten J-clips from the beginning then unfasten the rear armrest J-clip followed by the hook and loop strip while guiding material toward the tether anchor. Users need to first raise the cushion cover with foam pad section and locate the armrest bolts before removing these four bolts to extract the armrest assembly. First disconnect the two armrest bracket bolts before sliding off the respective covers while releasing the bracket cover clips. To install the component begin by reversing the uninstallation procedure starting with the armrest assembly followed by the two armrest bracket bolts then the two armrest bracket covers and finishing with the armrest brackets. Mount the seat cushion foam pad and put on the cover before reattaching the tether anchor material and securing both hook and loop strip and rear armrest J-clip. You should apply the J-clips before putting on the safety belt buckle pretensioner and tightening its nut. After placing back the safety belt buckle pretensioner cover and screw you should connect the safety belt buckle pretensioner wire harness to the seat while securing the clips and electrical connector at its cushion pan. Reinstall the 60 percent bench seat then activate the SRS power while checking for complete functionality without defects until vehicle release.

OEM 2005 Ford Ranger Armrest

Car Armrest

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Armrests found

View related parts
2005 Ford Ranger Armrest Part Number: 3L5Z-10644A22-AAC
$150.48 MSRP: $219.03
You Save: $68.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Armrest Assembly; Console Armrest
- Manufacturer Note: Ebony
- Base No.: <644A22
- Item Weight: 4.20 Pounds
- Item Dimensions: 24.2 x 9.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-10644A22-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Passenger Side Part Number: 4L5Z-1024100-AAD
$25.41 MSRP: $35.16
You Save: $9.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Right; Arm Rest
- Position: Front Passenger Side
- Base No.: <24100
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024100-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Driver Side Part Number: 4L5Z-1024101-AAC
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Left; Arm Rest
- Position: Front Driver Side
- Base No.: <24100
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024101-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Driver Side Part Number: 4L5Z-1024101-AAA
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Left; Arm Rest
- Position: Front Driver Side
- Base No.: <24100
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024101-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest Part Number: AL5Z-10644A22-AA
Product Specifications
- Other Name: Armrest Assembly; Seat Armrest
- Manufacturer Note: (QF)
- Replaces: 4L5Z-10644A22-AAA
- Base No.: <644A22
- Item Weight: 6.90 Pounds
- Item Dimensions: 23.3 x 12.5 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-10644A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Driver Side Part Number: 4L5Z-1024101-AAB
$34.47 MSRP: $48.90
You Save: $14.43 (30%)
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Left; Arm Rest
- Position: Front Driver Side
- Replaces: 1L5Z-1024101-AAA
- Base No.: 24101
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.2 x 4.5 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024101-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest Part Number: 4L5Z-13644A22-AAA
Product Specifications
- Other Name: Armrest Assembly; Seat Armrest
- Manufacturer Note: (TF)
- Base No.: <644A22
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-13644A22-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest Part Number: 4L5Z-10644A22-CAA
Product Specifications
- Other Name: Armrest Assembly; Seat Armrest
- Base No.: <644A22
- Item Weight: 7.50 Pounds
- Item Dimensions: 18.9 x 10.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-10644A22-CAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest Part Number: 4L5Z-10644A22-AAB
Product Specifications
- Other Name: Armrest Assembly; Seat Armrest
- Manufacturer Note: (QP)
- Base No.: <644A22
- Item Weight: 6.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-10644A22-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Driver Side Part Number: 4L5Z-1024101-AAD
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Left; Arm Rest
- Position: Front Driver Side
- Base No.: <24100
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024101-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Passenger Side Part Number: 4L5Z-1024100-AAC
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Right; Arm Rest
- Position: Front Passenger Side
- Base No.: <24100
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024100-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Passenger Side Part Number: 4L5Z-1024100-AAB
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Right; Arm Rest
- Position: Front Passenger Side
- Replaces: 1L5Z-1024100-AAA
- Base No.: 24100
- Item Weight: 1.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024100-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Passenger Side Part Number: 4L5Z-1024100-AAA
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Right; Arm Rest
- Position: Front Passenger Side
- Base No.: <24100
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-1024100-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Driver Side Part Number: 3L5Z-1024101-AAA
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Left; Arm Rest
- Position: Front Driver Side
- Base No.: 24101
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-1024101-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Ford Ranger Armrest, Front Passenger Side Part Number: 3L5Z-1024100-AAA
Product Specifications
- Other Name: Pad - Armrest; Door Armrest, Front Right; Arm Rest
- Position: Front Passenger Side
- Base No.: 24100
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-1024100-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2005 Ford Ranger Armrest

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Ranger Armrest available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Ranger Armrest as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Ranger Armrest Parts Q&A

Q: How to service the 60 percent bench seat armrest on 2005 Ford Ranger?
A: The first step for servicing the 60 percent bench seat armrest requires depowering the supplemental restraint system (SRS) to maintain safety because the safety belt pretensioner operates using pyrotechnics. Safety glasses must be worn by everyone during this operation. Mark the position of safety belt buckle pretensioner wire harness connections as you remove the 60 percent bench seat and write down routing paths which will be needed for reinstallation. First disconnect the safety belt buckle pretensioner electrical connector after removing its anchor clips. Then guide the wire harness through the seat frame. The safety belt buckle pretensioner cover screw needs removal followed by the cover together with the removing of the safety belt buckle pretensioner nut to complete the operation. Unfasten J-clips from the beginning then unfasten the rear armrest J-clip followed by the hook and loop strip while guiding material toward the tether anchor. Users need to first raise the cushion cover with foam pad section and locate the armrest bolts before removing these four bolts to extract the armrest assembly. First disconnect the two armrest bracket bolts before sliding off the respective covers while releasing the bracket cover clips. To install the component begin by reversing the uninstallation procedure starting with the armrest assembly followed by the two armrest bracket bolts then the two armrest bracket covers and finishing with the armrest brackets. Mount the seat cushion foam pad and put on the cover before reattaching the tether anchor material and securing both hook and loop strip and rear armrest J-clip. You should apply the J-clips before putting on the safety belt buckle pretensioner and tightening its nut. After placing back the safety belt buckle pretensioner cover and screw you should connect the safety belt buckle pretensioner wire harness to the seat while securing the clips and electrical connector at its cushion pan. Reinstall the 60 percent bench seat then activate the SRS power while checking for complete functionality without defects until vehicle release.