How to program the remote keyless entry (RKE) transmitters on 2005 Ford Ranger?

In order to program RKE transmitters, the vehicle must be unlocked using the transmitter or door switch with the driver door open. Eight times, turn the ignition off to on then press each of the transmitter buttons within 20 seconds. In case it is not responsive, look into it. Stop exit program by switching the key to OFF or 20 seconds.

OEM 2005 Ford Ranger Transmitter

Car Key

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmitter found

View related parts
2005 Ford Ranger Transmitter Part Number: 8L3Z-15K601-B
$62.61 MSRP: $75.00
You Save: $12.39 (17%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter; Transceiver
- Replaces: 2L3Z-15K601-AA, 2L3Z-15K601-AB, 8L3Z-15K601-AA
- Base No.: 15K601
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-15K601-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2005 Ford Ranger Transmitter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Ranger Transmitter available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Ranger Transmitter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Ranger Transmitter Parts Q&A

Q: How to program the remote keyless entry (RKE) transmitters on 2005 Ford Ranger?
A: In order to program RKE transmitters, the vehicle must be unlocked using the transmitter or door switch with the driver door open. Eight times, turn the ignition off to on then press each of the transmitter buttons within 20 seconds. In case it is not responsive, look into it. Stop exit program by switching the key to OFF or 20 seconds.