How to Service and Repair the Brake Proportioning Valve on a Four-Door Sedan Without ABS on 2005 Ford Taurus?

The servicing process of the brake load sensor proportioning valve for a four-door sedan without ABS must have at least ¾ tank of fuel and use a suitable lift with a curb height to position the wheels flat on the surface. You should not modify the upper nut on the valve operating rod before unstowing the set screw on the valve adjuster sleeve. Use 16.3 mm (0.65 inch) length of 3/8-inch OD x ¼-inch ID rubber vacuum hose which needs a lengthwise cut before you put it onto the valve operating rod. Perform this step only when the valve adjuster sleeve moves freely as it rests at the lower mounting bracket. Subsequently secure the set screw and lower the vehicle to the ground.

OEM 2005 Ford Taurus Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Proportioning Valves found

View related parts
2005 Ford Taurus Pressure Metering Valve Part Number: F6DZ-2B547-AD
Product Specifications
- Other Name: Valve Assembly; Brake Proportioning Valve
- Base No.: 2B547
- Item Weight: 5.30 Pounds
- Item Dimensions: 10.1 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-2B547-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2005 Ford Taurus Pressure Metering Valve Part Number: 2F1Z-2B091-AA
Product Specifications
- Other Name: Valve - Brake Pressure; Brake Proportioning Valve; Valve - Brake Pressure Reducing
- Manufacturer Note: S/W, w/o ABS.
- Base No.: 2B091
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.0 x 6.8 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-2B091-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2005 Ford Taurus Brake Proportioning Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Taurus Brake Proportioning Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Taurus Brake Proportioning Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Taurus Brake Proportioning Valve Parts Q&A

Q: How to Service and Repair the Brake Proportioning Valve on a Four-Door Sedan Without ABS on 2005 Ford Taurus?
A: The servicing process of the brake load sensor proportioning valve for a four-door sedan without ABS must have at least ¾ tank of fuel and use a suitable lift with a curb height to position the wheels flat on the surface. You should not modify the upper nut on the valve operating rod before unstowing the set screw on the valve adjuster sleeve. Use 16.3 mm (0.65 inch) length of 3/8-inch OD x ¼-inch ID rubber vacuum hose which needs a lengthwise cut before you put it onto the valve operating rod. Perform this step only when the valve adjuster sleeve moves freely as it rests at the lower mounting bracket. Subsequently secure the set screw and lower the vehicle to the ground.