FordParts
My Garage
My Account
Cart
OEM 2005 Ford Thunderbird Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Pads found
2005 Ford Thunderbird Brake Pads, Front Part Number: YU2Z-2V001-JA
$50.07 MSRP: $74.98You Save: $24.91 (34%)Product Specifications- Other Name: Pad; Disc Brake Pad Set, Front; Front Pads; Disc Brake Pad Set
- Manufacturer Note: Ford Retail Spec
- Position: Front
- Replaces: 6W4Z-2001-BA, BRF-1402, XW4Z-2001-BA
- Base No.: 2001
- Item Weight: 4.90 Pounds
- Item Dimensions: 2.6 x 5.4 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YU2Z-2V001-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Thunderbird Brake Pads, Rear Part Number: 4W4Z-2200-AA
Product Specifications- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Base No.: 2200
- Item Weight: 3.50 Pounds
- Item Dimensions: 6.5 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W4Z-2200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Thunderbird Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Thunderbird Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Thunderbird Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Thunderbird Brake Pads Parts Q&A
- Q: How to service the front brake pads on 2005 Ford Thunderbird?A: Start the front brake pad service from a hoisted vehicle which should be placed in neutral gear. Disassemble and set the brake caliper to the side by removing its two bolts. First remove both brake pads along with their spring clips. A specific tool must be used to protect angular boots and pistons while you operate the tool to compress caliper pistons. Place new brake pads inside the spring clips after which you can position the brake caliper and secure it through installation of the two brake caliper bolts with 35 Nm torque (26 foot lbs.).