FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Engine Control Module
Engine Control Computer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Engine Control Modules found
2005 Lincoln Aviator ECM Part Number: 5C5Z-12A650-CBRM
Product Specifications- Other Name: Module - Engine Control; Engine Control Module
- Replaces: 5U7Z-12A650-BA, 5C5Z-12A650-CB
- Base No.: 12A650
- Item Weight: 2.90 Pounds
- Item Dimensions: 10.2 x 7.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C5Z-12A650-CBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Control Module Part Number: 3C5Z-12A650-DBRM
Product Specifications- Other Name: Module - Engine Control; Engine Control Module; ECM
- Replaces: 2C5Z-12A650-BF, 2U7Z-12A650-FCA, 3C5Z-12A650-AD, 3U7Z-12A650-DDA, 3C5Z-12A650-DB
- Base No.: 12A650
- Item Weight: 2.80 Pounds
- Item Dimensions: 10.1 x 7.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C5Z-12A650-DBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Engine Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Engine Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Engine Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Engine Control Module Parts Q&A
- Q: How to service the Engine Control Module on 2005 Lincoln Aviator?A: The service of the Engine Control Module begins with first disconnecting the battery ground cable. The procedure starts with taking out the RF door scuff plate followed by the RH cowl side trim panel. When handling the powertrain control module PCM disconnect its electrical connectors before uninstalling while you should fasten mounting nuts to 8 Nm (71 lb-in) during reassembly. Move the glove box below its stops before unconnecting its side-mounted cable. Securing the PCM bracket with a 10 Nm (89 lb-in) torque value needs to be performed during installation. Locate and remove the pin-type retainer before placing the sound deadening insulation in an upward direction. Lower the glove box until it reaches the stops then disconnect the cable located on its side and remove the lower screw that secures the fuel pump driver module along with its repositioning and electrical connector disconnection. As the final step remove the PCM together with its bracket before reinstalling through the reverse order of removal.