FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Manifolds found
Product Specifications- Other Name: Manifold Assembly - Exhaust; Manifold
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Manifold Assembly - Exhaust; Manifold
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 10.80 Pounds
- Item Dimensions: 20.3 x 9.9 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Exhaust Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Exhaust Manifold Parts Q&A
- Q: How to service the left-hand exhaust manifold on 2005 Lincoln Aviator?A: First position the vehicle in neutral and place it on a hoist before starting the service of the left-hand exhaust manifold. Begin by removing the steering intermediate shaft then detach the left front wheel with tire and finally pull out the left front inner fenderwell. Safely disconnect the Y-pipe through the removal of its two exhaust Y-pipe nuts then secure them at 20 Nm (15 ft. lbs.) during reinstallation. Service of the left-hand exhaust manifold begins with removing three heat shield bolts and the heat shield before you reinstall these components using 11 Nm (8 ft. lbs.) torque. You must take off the eight exhaust manifold nuts before removing the manifold itself along with disposal of the old exhaust manifold gasket. The installation requires an updated exhaust manifold gasket which must be followed by tightening the manifold nuts to a torque of 20 Nm (15 ft. lbs.). The installation process should end with the reverse procedure.