FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Thermostat Housing
Engine Coolant Thermostat Housing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostat Housings found
2005 Lincoln Aviator Thermostat Cover Part Number: 2C5Z-8592-EB
$22.15 MSRP: $30.64You Save: $8.49 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Connection - Water Outlet; Thermostat Housing Cover; Thermostat Housing
- Base No.: 8592
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.5 x 2.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-8592-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Thermostat Housing Part Number: 2C5Z-8592-BA
Product Specifications- Other Name: Connection - Water Outlet; Thermostat Housing Cover
- Base No.: 8592A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-8592-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Thermostat Housing Parts Q&A
- Q: How to service the thermostat housing on 2005 Lincoln Aviator?A: The servicing process for the thermostat housing starts by placing the vehicle in neutral position on a hoist. The first step includes draining the cooling system followed by removing bolts with the oil filter drip shield while tightening them to 7 Nm (62 inch lbs.) reinstalling them. After removing the coolant inlet connector bolts the person installing should tighten them to 10 Nm (89 inch lbs.). The first step is to inspect the O-ring seal along with cleaning it before placing a new seal if replacement becomes necessary followed by removing the coolant inlet connector. Then remove the thermostat and remove the coolant hose from connection. You need to remove the thermostat housing bolts and housing before you install them back by tightening to 25 Nm (18 ft. lbs.). The service ends by filling and bleeding the cooling system after performing the reverse procedures.