FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2005 Lincoln Aviator Vapor Canister Part Number: F65Z-9D653-AA
$85.64 MSRP: $140.91You Save: $55.27 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.1 x 4.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2005 Lincoln Aviator?A: The service and repair process for evaporative emission control canister requires placing the vehicle in neutral position on a hoist. The disconnect procedure for the battery ground cable aids in safety practices by reducing the possibility of electrical sparks that could start fuel vapors burning. The use of open flames and smoking must remain distant from all fuel-related parts because they contain dangerously flammable fuel mixtures. Restoration and replacement activities for fuel components require protected liquid and vapor fuel openings which must receive caps or tape for contamination prevention until immediate before component installation. Disembark the fuel tank while disconnecting the fuel vapor hose from the fuel vapor Y. Apply clean engine oil to the connections before taking off both fuel vapor hose connectors from the fuel vapor Y and extracting the fuel vapor tee. Disconnect the two fuel vapor hoses from each EVAP canister before you remove its two mounting nuts by tightening them to 10 Nm (89 lb-in) when reinstalling. Finish the process by taking out the two EVAP fuel vapor canisters and reinstall everything in the opposite order of removal.